Frontage 141337 MUL, Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS

PARTS LIST

A. BOTTOM
B. LOWER MIDDLE
C. UPPER MIDDLE
D. TOP

SKU 141340 A/B CLE -  VIRGINIA PINE 10ft - CLEAR

2765 TIPS METAL STAND

UL 1900 LIGHTS

MAX DIAMETER 75”

NUMBER OF PERSONS

RECOMMENDED FOR

ASSEMBLY: 2

COLORCODE ON PLUG

RED
BLUE
GREEN
BLACK

VIRGINIA PINE 10ft - CLEAR - ITEM #141340 A/B CLE

Step 1

Pull apart the legs of the stand so that they are “X” shaped.

Fasten the bottom screws to lock the stand into position.

Step 2

Insert the section (A) of the tree into the stand and tighten 

screws on base to secure tree pole. 

Step 3

Plug power strip into the remote control receiver. Then,

plug remote control receiver into wall outlet. 

Step 4

To shape your tree start with the bottom most layer of 

branches, with each branch start with the tips closest to the 

pole and lift each tip up and out in alternating directions.

Repeat for each branch.  It is recommended to shape section 

(A) before adding section (B).

Step 5

Insert the section (B) of the tree into the section (A) of the 

tree.  Plug light set of section (A) into the power strip. Then,  

plug light set of section (B) into section (A).

Step 6

Repeat step 4 for shaping.

Step 7

Insert the section (C) of the tree into section (B) of the tree.

Plug lights set from section (C) into section (B).

Step 8

Repeat step 4 for shaping. 

Step 9

Insert section (D) of the tree into the section (C) of the tree.

Plug lights from (D) into section (C).

Step 10

To shape the top (D) section of the tree it will be necessary to 

gently bend the branches downward to the desired angle before 

shaping tips.

HARDWARE

A. TREE STAND

QUANTITY 1 PC

1/4” SCREWS FOR TREE STAND

QUANTITY 7 PCS

ACCESSORY BAG
- 

- POWER STRIP
- REMOTE CONTROL W/ RECEIVER
- EXTRA BULBS AND FUSES
- LIGHT STRING

QUANTITY 2 PCS

20

5b.