Frontage 141337 MUL, Assembly Instructions Manual

SKU 141339 CLE - VIRGINIA PINE 9ft - CLEAR

2205 TIPS METAL STAND

L

U  1700 LIGHTS

MAX DIAMETER 71”

IONS

VIRGINIA PINE 9ft - CLEAR - ITEM #141339 CLE

Step 1

Pull apart the legs of the stand so that they are “X” shaped.

Fasten the bottom screws to lock the stand into position.

Step 2

Insert the section (A) of the tree into the stand and tighten 

screws on base to secure tree pole. 

Step 3

Plug surge protector into the remote control receiver. Then,

plug remote control receiver into wall outlet. 

Step 4

To shape your tree start with the bottom most layer of 

branches, with each branch start with the tips closest to the 

pole and lift each tip up and out in alternating directions.

Repeat for each branch.  It is recommended to shape section 

(A) before adding section (B).

Step 5

Insert the section (B) of the tree into the section (A) of the 

tree.  Plug light set of section (A) into the surge protector. Then, 

plug light set of section (B) into section (A).

Insert the section (C) of the tree into the section (B) of the 

tree. Plug light set of section (B) into section (C).

Step 6

Repeat step 4 for shaping.

Step 7

Step 8

Repeat step 4 for shaping. 

Step 9

Insert section (D) of the tree into the section (C) of the tree.

Plug lights from (D) into section (C).

To shape the top (D) section of the tree it will be necessary to 

gently bend the branches downward to the desired angle before 

shaping tips.

Step 10

PARTS LIST

A. BOTTOM
B. LOWER MIDDLE
C. UPPER MIDDLE
D. TOP

HARDWARE

A. TREE STAND

QUANTITY 1 PC

1/4” SCREWS FOR TREE STAND

QUANTITY 7 PCS

NUMBER OF PERSONS

RECOMMENDED FOR

ASSEMBLY: 2

ASSEMBLY INSTRUCTIONS

COLORCODE ON PLUG

RED
BLUE
GREEN
BLACK

ACCESSORY BAG
- 

- 

SURGE PROTECTOR

- REMOTE CONTROL W/ RECEIVER
- EXTRA BULBS AND FUSES
- LIGHT STRING

QUANTITY 2 PCS

20

9c.