46030 / 10 ft. Nordman Fir Pro Shape Tree
Page 1
F R O N T G A T E®
OUTFITTING AMERICA’S FINEST HOMES®
46030CLE / 10 ft. Nordman Fir Pro Shape Tree – Clear Lights
46030MUL / 10 ft. Nordman Fir Pro Shape Tree – Multi Lights
PACKED IN TWO REUSABLE CARTONS
BILL OF MATERIAL (BOM)
1 EA. TREE STAND (with 3 screws)
1 EA. BOTTOM SECTION OF TREE “A”
1 EA. LOWER MIDDLE SECTION OF TREE “B”
1 EA. MID MIDDLE SECTION OF TREE “C”
1 EA. UPPER MIDDLE SECTION OF TREE “D”
1 EA. TREE TOP SECTION OF TREE “E”
1 EA. REMOTE ON AND OFF UNIT
1 EA PACKET OF EXTRA BULBS AND FUSES
1 EA. TREE CARTON-WITH EXPANDABLE FEATURE
1 PAIR ARTIFICIAL CHRISTMAS TREE SHAPING GLOVES
TREE ASSEMBLY INSTRUCTIONS
1.
Unpack:
Carefully remove the contents from the carton and keep the carton for future storage.
Some sections of the tree may be heavy and assistance may be required. Remove any
outer foam wrapping from the tree and its branches (See Fig. 1A)
.
2.
Basic Assembly Steps:
CAUTION: Two people may be needed to balance and assemble tree’s upper
sections. Please use a ladder, if needed, and follow all ladder safety instructions.
Your 10 ft. tree is packed in two cartons. One carton is marked with an “A”, and the
other with a “B”. The contents of each tree carton is listed on the side of the box.
2.1 –
Open the carton and take out all the contents. All contents that are listed in the Bill
of Material section on this page should be enclosed. Locate the metal tree stand and
assemble it by separating the legs of the stand to form an “X” shape (See Fig 2A). Insert
Fig. 1A