61246 / 7.5 ft. Royal Spruce Pro Shape Tree
Page 1
F R O N T G A T E®
F R O N T G A T E®
F R O N T G A T E®
F R O N T G A T E®
OUTFITTING AMERICA’S FINEST HOMES®
INSTRUCTIONS FOR:
Item# 61246 CLR/ 7.5 ft. Royal Spruce Pro Shape Tree with 1200 ct. Clear Lights
Item# 61246 MUL/ 7.5 ft. Royal Spruce Pro Shape Tree with 1200 ct. Multi Lights
BILL OF MATERIAL (BOM)
PACKED IN ONE REUSABLE CARTON
•
1 EA. TREE STAND (with 3 screws)
•
1 EA. BOTTOM SECTION OF TREE “A”
•
1 EA. LOWER MIDDLE SECTION OF TREE “B”
•
1 EA. UPPER MIDDLE SECTION OF TREE “C”
•
1 EA. TREE TOP SECTION OF TREE “D”
•
1 EA. REMOTE ON AND OFF UNIT
•
1 EA. WARRANTY AND INSTRUCTIONS
•
1 EA PACKET OF EXTRA BULBS AND FUSES
•
1 EA. TREE CARTON-WITH EXPANDABLE FEATURE
•
1 PAIR ARTIFICIAL CHRISTMAS TREE SHAPING GLOVES
TREE ASSEMBLY INSRUCTIONS
1.
Unpack:
Carefully remove the contents from the carton and keep the carton for future storage. Some
sections of the tree may be heavy and assistance may be required. Be sure to untangle any
wires that may be caught with other items. (Please DO NOT forcibly remove any contents.)
Remove any outer foam wrapping from the tree and its branches (See Fig. 1A).
Fig. 1A
2.
Basic Assembly Steps:
CAUTION: Two people may be needed to balance and assemble tree’s upper
sections. Please use a ladder, if needed, and follow all ladder safety instructions.
2.1
-
Open the carton and take out all the contents. All contents that are listed in the Bill of
Material section on this page should be enclosed. Locate the tree stand and assemble it by
separating the legs of the stand to form an “X” shape (See Fig. 2A). Insert each of the three
