LIGHTING ILLUSTRATIONS
1. Make sure the lid is open.
2. Push and turn one of Main Burner
knob slowly to IGNITE/HI, burner should
light immediately.
1. Push and turn Rear Burner knob
slowly to IGNITE/ON, hold in until the
burner is lit. Once it is lit, continue to
press and hold for another 15 seconds
to ensure the burner stays lit. If burner
does not light up, turn the knob to OFF
and repeat the lighting procedure.
3. If burner does not light up, turn the
knob to OFF and repeat the lighting
procedure. If burner does not light up
after step 2, turn the knob OFF, wait for
5 minutes, and repeat the lighting
procedure or light by match
2. If burner does not light up after step
2, turn the knob OFF, wait for 5
minutes, and repeat the lighting
procedure or light by match
To light the Main Lid
To light the Rear Burner
16
Section Six