STORAGE
GENTLY PRESS BRANCHES AGAINST THE TREE TRUNK AS YOU DISMANTLE THE
TREE
REMOVE THE TREE STAND FROM SECTION A
CAREFULLY PLACE THE TREE SECTIONS AND TREE STAND BACK INTO THE
CARTON(S) AND TAPE THEM CLOSED
CAUTIONS AND WARNINGS
o
DO NOT LIFT SECTIONS OF THE TREE WITH THE BRANCHES. LIFT USING
THE METAL POLE.
o
DO NOT STEP ON THE BRANCHES DURING THE ASSEMBLY PROCESS
o
DO NOT TWIST THE BULBS WHEN REPLACING AND ONLY USE THE SPARE
BULBS PROVIDED IN THE CARTON AS REPLACEMENTS. PULL THE LAMP
AND PLASTIC BASE STRAIGHT OUT OF THE LAMPHOLDER.
o
DO GRASP ELECTRICAL PLUGS AND REMOVE IT FROM THE RECEPTACLE
OR OUTLET DEVICE.
NEVER
UNPLUG BY PULLING ON THE CORD.
o
PLEASE DO NOT REMOVE TAPE FROM PLUG HUBS; THIS IS FOR YOUR
PROTECTION AND TO INSURE THAT THE PLUGS MAINTAIN A FIRM
CONNECTION.
o
DO NOT HANG ORNAMENTS OR OTHER OBJECTS FROM THE ELECTRICAL
CORDS OR WIRES.
o
THIS PRODUCT EMPLOYS ELECTRICAL OVERLOAD PROTECTION (FUSES)
INSIDE EACH PLUG. SPARE FUSES ARE PROVIDED IN THE CARTON. OUR
PRODUCT DESIGN HAS NOT EXPERIENCED FUSE PROBLEMS; HOWEVER, IF
A FUSE BLOWS THE PRODUCT SHOULD BE UNPLUGGED BEFORE
REPLACING THE FUSE.
o
WHEN A LIGHT SET FLICKERS OR GOES ON AND OFF, THE MOST COMMON
PROBLEM IS A LOOSE FITTING BULB. CHECK TO MAKE SURE ALL BULBS
ARE SEATED FIRMLY IN THE SOCKETS.
o
THE MOST COMMON PROBLEM WITH A LIGHT SET IS A BULB THAT NEEDS
REPLACING. LOOSE OR DAMAGED BULBS CAN CAUSE AN ENTIRE STRING
TO FAIL. A BURNED OUT BULB WILL NOT CAUSE THE STRING TO GO OUT IF
IT IS NOT REMOVED.
CARE AND MAINTENANCE
STORE CARTON IN COOL AND DRY PLACE.
DO NOT
STORE THE TREE IN A DAMP AREA OR IN AN AREA WHERE THE
TEMPERATURE EXCEEDS 100˚ F.
PLEASE CONTACT ONE OF OUR PRODUCT SPECIALISTS FOR ASSEMBLY
ASSISTANCE OR QUESTIONS AT 1-800-537-8484 OR EMAIL
PS@FRONTGATE.COM
.
SPECIALISTS ARE AVAILABLE WEEK DAYS 8:00 AM TO 8:00 PM OR SATURDAY 9:30
AM TO 6:00 PM.
