1. This is for decorative use only - do not immerse in water or expose to heat. Keep away from fire.
2. Please use water only for cleaning purpose.
3. When not in use, store neatly in a cool, dry location protected from sun light
4. When the remote control has malfunctioned, please remove the surge protector from the receiver and
plug the surge protector directly into the wall
CARE & MAINTENANCE INSTRUCTION
1. Light tree one section at a time as described in assembly instructions, so you can easily identify and
bulbs that may be dislodged. Push any loose bulbs back into their sockets.
2. Separate the branch tips to form a “V” shape and fluff the needles. Make sure each tip is spread out
and no two branches are touching each other. For best access to branches, shape each section prior to
adding the next section as described in the initial assembly instructions. You may want to wear
cotton gloves when fluffing needles to avoid scratches and skin irritation.
3. Starting with the bottom row, position the branches parallel to the floor. Angle the tips slightly
upward like they are growing towards the sun. With each successive row, make the upward angle of
the branches more pronounced. Position inner tips to hide the center of the tree.
4. Arrange the uppermost section of the tree so that the tips are evenly spaced and pointing upward.
5. Step back and review the tree. Adjust branches and tips as necessary to give the tree a fuller
appearance (The tree may be shaped differently (upswept/downswept/ etc.) pending on one’s
preference.)
THE FOLLOWING STEPS WILL HELP MAKE YOUR TREE LOOK MORE REALISTIC
1. If entire tree lighting does not light, make sure the light sets are securely inserted in a working wall
outlet.
2. If an entire section of the tree does not light, please review following actions:
TROUBLE SHOOTING TIPS
a) Check that all plugs within the tree are securely connected.
b) Check the fuse in light sets to determine if it may need replacement. Caution: Noted that a
blown fuse indicates an electrical overload or electrical short circuit. If the fuse is blown,
unplug light sets from outlet. Also, unplug any additional strings. Replace the fuse following
manufacturer instruction with proper fuse rating. If the replacement fuse blows, a short circuit
may be present and the product should be discarded.
c) Check fuse in plug connection on end of each light string (See section on replacing plug fuses
in this document).
