In the interest of continual product development we reserve the right to change any of the
details and specifications without notice.
Page 12
COMPRESSOR/CONDENSING UNITS INSTALLATION INSTRUCTIONS
ACCORDING TO MACHINE DIRECTIVE 2006/42/EC annex VI.
Intended use:
Hermetic compressors and condensing units to be installed in
refrigerating machines.
WARNING
•
Before incorporating the compressor/condensing units inside the application read
carefully all of the following instructions. Failure to follow these safety warnings could
result in serious injury or death.
WARNING
•
During application design and compressor/condensing unit intergration, the original
equipment or manufacturer must follw all valid and applicable regulations in terms od
electrical, pressure and flammabilty safety.
WARNING
•
The equipments electrical connections and wiring must be designed taking into
consideration electrical characteristics of the compressor/condensing unit and its
electrical components.
WARNING
•
For applications designed to be used with flammable refrigerants it is necessary to
perform an evaluation of the risk involved with the usage of this refrigerant. The
equipment manufacturer should perform a risk assessment and ensure proper knowledge
about the handling and use of any flammable refrigerant prior to applying the
compressor/condensing unit.
WARNING
•
Compressor/condensing unit incorpration into the final equipment or any service
performed must be done by trained personannel only.
WARNING
•
Compressor/condensing unit handling must be performed with care keeping in mind the
weight to avoid injury. Protective means (safety glasses, glows and protective shoes)
must be worn during compressor handling at the time of original integration and during
servicing.
CAUTION
•
Compressor/condensing units in this application must be used within a working range
specified by the manufacturer.
