background image

INSTALLATION AND MAINTENANCE MANUAL 

 

TRANSLATION OF THE 
ORIGINAL DOCUMENT 

For additional copies visit: 

www.frost‐trol.com

 

WALEN SOLID 

LINES 

D008586

 Versión: 

-26- 

 

6.2.

 

FINAL SHUTDOWN 

 

We, Frost-trol SA, declare this product is covered by Directive 2002/96/CE (Waste 
Electrical and Electronic Equipment) designed to halt the increase of this type of 

waste and promote  recycling as well as decreasing disposal. 
 

The symbol of the crossed-out waste bin that appears on the Nameplate declares: 
 

 

that the product was put in circulation after 13th 
August 2005; 

 

 

that the product  is subject to separate collection 
and must not be treated like normal domestic 
waste or sent to dumps for disposal. 

 

 
This cabinet contains refrigerant, polyurethane foam, oil, plastic and metallic, 

electric and electronic elements. Therefore its destruction or recovery should be 
carried out in accordance with current legislation at an authorised waste dumping 

ground. Parts that form the refrigeration circuit must not be cut or separated until 
the refrigerant has been removed for recovery. 
 

Therefore, when the cabinet has reached the end of its working life and thus needs 
to be removed, the user is required to deliver the product for disposal to the 

collection centre specified by the local authorities for recovery and recycling of 
professional WEEE. 

 
In the case of trade-in of the old product for a new one, the user can ask the seller 

to take delivery of the old one, no matter what the brand. 
 
The manufacturer is responsible for making recovery, disposal and treatment of its 

products feasible at the end of their useful life, either directly or via a collective 
system. 

Violations of the regulation call for specific sanctions, to be established 
autonomously by each EU member country with its own legislation, binding equally 

on all those subject to its laws. 
 

 

6.3.

 

DISMANTLING THE CABINET 

 

In accordance with the waste disposal regulations in each country and in respect of 
the environment, please differentiate the parts of the cabinet so as to be able to 

dispose of them separately or recycle them adequately. 
None of the parts that make up the cabinet can be disposed of together with urban 

solid waste, except for the metallic components which, in any case, are not 
classified as special waste in most European countries.  

This product contains HFC, fluorated refrigerating gases with high Global Warming 
Potential, so: 
 

Parts that form the refrigeration circuit must not be cut or separated until 
the refrigerant has been removed for recovery at a specialised centre. 

 

Summary of Contents for WALEN





























Reviews: