10
The correct tension is achieved by adjusting the
chain from its loose position to when it becomes
lightly tense.
To tighten the chains:
1. Slightly loose the two Axle
bolts on both sides of the rear
wheel. Then slowly adjust the
two chain adjusting
2.Occasionally rotate the rear
wheel to make sure chain is
aligned.
3.Finally lock and tighten the
rear axle bolts prior to riding.
14
Maintenance
Schedule
Proper care of your motorcycle will insure optimal performance and a
longer life span. The following are a few maintenance suggestions that
will keep your motorcycle running in top condition:
Daily Maintenance
Perform each time you ride your motorcycle
Clean fuel leakage or air leakage.
Check that all nuts and bolts are securely tightened.
Weekly/ Monthly Maintenance
Check the pull starter, especially the cord and return
spring.
Remove the spark plug and check the electrode gap.
Adjust it to 0.6mm, or change the spark plug.
Clean the cooling
fi
ns on the cylinder head and check
that the air intake at the starter is not clogged.
Clean the air
fi
lter.
