Inspection of flight attitude
To ensure flight safety, checking the compensation direction of the model is strongly recommended.
Activating auto level mode will produce a strong deflection on AIL and ELE, which is used to check the response of aileron
and elevator. Also, activating Knife-edge and Hover mode will have the same reaction on the rudder.
When the plane is rotated left or right (Roll), ailerons should have the correcting actions as illustrated above.
Please follow the on-screen instructions.
•
Click the “Calibration” button and wait until the BLUE LED flashing, indicating the calibration on this orientation has been
completed.
•
Repeat the above step five times (remaining 5 dimensions). Placing RB-30/RB-40 in the required orientation, ensure all
values (X, Y, Z, Mod) are 1.000 with the deviation of ±0.1.
• Press “Write” to save the data on RB-30/RB-40 when done.
Page 29
When the plane is rotated up or down (Pitch), elevators should have the correcting actions as illustrated above.
When the plane is rotated to left or right (Yaw), rudders should have the correcting actions as illustrated above.
Page 30