STEP2: Channel Range Setting
The TWIN Lite RF module supports 24 channels
(1-8ch / 1-16ch / 1-24ch).
The channel range is configurable by pressing the
channel bars, please also make sure of the
channel configuration before using the module.
Version
1.0
Instruction Manual for FrSky TWIN Lite Pro Model
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us : frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: sales4tech@gmail.com
● Dimension: 62.8*30*17.2mm (L*W*H)
● Weight: 36.8g (without antenna)
● Operating current: 84mA@100mW
● RF power: 10mW/25mW/100mW/200mW/500mW
● Supports 4 RF protocols: ACCST D16 / ACCESS / ELRS / TW modes
● Antenna: 2* external 2.4G antenna
Specifications
The Twin Lite PRO is a powerful RF module which enables ETHOS capable radios to bind to the TW series
receivers and support the TW protocol’s dual 2.4G frequencies simultaneously on the same receiver. The TW
active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes
over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are
active on the TW series module, and receiver at the same time.
The RF module has two 2.4G external antennas RF mounted to provide multi-directional and wider coverage for
transmitting signals compared to a single antenna design. Taking advantage of these features, the Twin system
can provide less latency and higher reliability at a faster data rate with confidence.
In addition to the TW mode, this module also supports ACCST D16, ACCESS, and ELRS 2.4G modes, this
means users can benefit from a wide range of compatible receiver options to choose and bind to when building
the RC model. The Twin Lite Pro module offers resilient RF power options up to 500mW, constructed with the
CNC machined metal module shell that helps aid heat dissipation, this system can ensure a stable long-range
control further around tens of kilometers under long working hours.
Introduction
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us: frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: sales4tech@gmail.com
Version
1.0
Instruction Manual for FrSky TWIN Lite Pro Model
● Less latency with more range and higher reliability at a faster data rate
● CNC machined metal module shell designed to aid heat dissipation
● Adjustable RF Power (Up to 500mW)
● Supports 4 RF protocols: ACCST D16 / ACCESS / ELRS (Compatible) / TW Mode
TW Mode (ETHOS Radios compatible)
-
Highly resilient RF module providing dual 2.4G signals working simultaneously
-
Long-range control (Tens of kilometers, range varies based on the RF Power settings.)
-
Low-latency (
＜
4ms) supporting full telemetry
Features
Green LED
OFF
ON
ON
ON
Red LED
OFF
OFF
OFF
ON
Mode
ACCST D16
ACCESS
ELRS
TW
Blue RED
ON
OFF
ON
ON
LED State
62.8mm
30mm
17.2mm
42.2mm
109.4mm
Overview
Version
1.0
Instruction Manual for FrSky TWIN Lite Pro Model
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us : frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: sales4tech@gmail.com
Version
1.0
Instruction Manual for FrSky TWIN Lite Pro Model
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us : frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: sales4tech@gmail.com
STEP5: Automatic Binding (Smart Match)
Move the cursor to RX1 [BIND], press it and
repower the receiver.
Click the RX to complete the binding after the
receiver window pops up, the system will confirm
"Bind succeed".
STEP3: Model ID Setting
The system assigns the receiver a number for the
receiver (Model ID) automatically while creating a
new model. ( The Model ID can be set from 00 to
63, with the default ID being 1.)
STEP1: Enable RF Module
Enter the RF system menu by the touch-screen or
use the navigation encoder key.
How to use the external RF module
Choose the External Module.
Then turn the state of External RF to On. Set the
binding mode for the external RF module
corresponding to the receiver (ACCST D16,
ACCESS, ELRS, TW MODE).
STEP6: RF Power Setting
TWIN Lite Pro can offer multiple RF power options
up to 500mW which can achieve a further
controlling range.
Open the Power menu bar and select the desired
power level according to usage.
STEP1:
Change the binding mode to [ELRS] under the
[TW Lite] module menu.
A
nd press [Config] to enter the binding menu.
How to bind the receiver in the ELRS mode
STEP4: Registration
For TW Mode as an example, select the Set
[Register] for getting the radio into Registration
status in the RF System-External Module tool,
then press the F/S button on the receiver and
power the receiver on.
When the "RX Connected" page pops up, press
the [REGISTER] to complete the Registration
procedure and then power the receiver off.
(The system automatically assigns the receiver a
UID differently in the same model when you have
several receivers to bind at the same time.)
Reset: Registration procedure is not required
to repeat anymore after the receiver was
once registered even though the receiver is
deleted. Pressing the [Reset] and repower
the receiver can have the bound recovered.
