4
Chapter 1: Introduction
The allowable leakage currents of IEC 60601-1 must not be exceeded. IEC 60601-1 should be
consulted when assembling such a system.
Warning: The Colt should not be connected to a multiple socket outlet with other equipment.
The USB connector should only be connected to a standard Computer USB port.
Electromagnetic compatibility
The Colt Audiometer complies with IEC 60601-1-2.
The Colt Audiometer generates and uses radio frequency energy. In some cases the device
could cause interference to radio or television reception. You can determine if the Colt Audi-
ometer is the source of such interference by turning the unit off and on.
If you are experiencing interference caused by the Colt Audiometer, you may be able to cor-
rect it by one or more of the following measures:
1. Relocate or reorient the receiving antenna.
2. Increase the distance between the Colt Audiometer and the receiver.
3. Connect the Colt Audiometer to a different outlet than the receiver.
In some cases radio transmitting devices, such as cellular telephones, may cause interference
to the Colt Audiometer. In this case try increasing the distance between the transmitter and
the Colt Audiometer.
Safety Contact Information
If you are located in the European Union, please report all safety-related concerns to our
authorized representative:
Sivantos Ltd.
Platinum House
Sussex Manor Business Park
Gatwick Road
Crawley RH10 9NH
ENGLAND
Tel: 01293 423787
Otherwise, please report all safety-related concerns to:
Frye Electronics, Inc
PO Box 23391
Tigard, OR 97281-3391, USA
1.6 Cleaning the Colt Audiometer
For your safety, disconnect the Colt Audiometer from electrical power while cleaning.
EC REP
