Frye Electronics FONIX COLT Audiometer
13
Figure 2.2B: The Colt Audiometer Base containing the precise electronics needed for Audiometric
Testing.
Step 1- Power on Colt Audiometer Base
Plug the Colt Audiometer Base into a suitable source of AC power (100-240 VAC, 50-60 Hz) and
turn on the power switch. See Figure 2.2C.
Figure 2.2C: Colt Audiometer Base power input
Step 2 – Power on Android Tablet
Press the “on” button located on the side of the tablet. Hold it down for several seconds. See
Figure 2.2D.
A vibration may be felt and the boot sequence will occur.
When the boot sequence ends, a picture of a lock will appear. Touch the lock and slide it to the
right. See Figure 2.2E.
