Frye Electronics FONIX COLT Hearing Evaluator
53
To change the Right Microphone volume calibration, select Mic as the Input on the right The
IntFile1, IntFile2, External1 and External2 volumes are shared with both channels, so if you
change the calibration on the left channel volume for the Input, that same calibration is used
for the right channel Input. You only need to change the calibration for one of the channels.
Patient Response Switch Tone Volume
When the Patient Response Switch is pressed, a Tone is presented in the Stereo Monitor head-
set to indicate that the switch was pressed. To adjust the volume of this tone, press and hold
the Response button on the Tablet. A volume control dialog for the Tone will be presented.
Change the volume to the desired level and press "Save" to save it, or "Cancel" to disacrd the
change.
