9
APPLICATION EXAMPLES
MAINS INPUT
SERIAL:
117 V
SPKR OUT
LIFT
GROUND
POWER STATION MODEL PS-100
STEVEN FRYETTE DESIGN, INC.
AMP IN
IMPEDANCE
SELECT
LINE OUT
BALANCED
SPEAKER
2/4
8
16
2/4
8
16
200W
MAX
FT SW
AMPLIFIER
FX SEND
LINE IN
FX RETN
FX
LEVEL
LINE OUT
FUSE
MAIN
T4A
50/60 HZ
300 WATTS
AVIS: RISQUES DE CHOC ELECTRIQUE, NE PAS OUVRIR:
WARNING: HAZARDOUS VOLTAGE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL:
CAUTION: DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE:
CAUTION REPLACE ONLY
WITH SAME TYPE FUSE
UTILISER UN FUSIBLE DE
ECHANGE DE MEME TYPE
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
NO USER SERVICABLE PARTS INSIDE
LINE
LEVEL
HI
LO
to input
on mixer
from PS100
FX loop
to PS100 FX loop
to PS100 line in
PS100 spkr out to cab in / 8 Ω
to input
on mixer
F
5. David Torn type setup for live performance and/or recording.
Power Station
OPERATE
VOLUME
PRESENCE
DEPTH
BYPASS
POWER
ON
Variable Reactive Load + Vacuum Tube Power PS-100
EDGE
SELECT
FLAT
BRITE
DEEP
LEVEL
FLAT
WARM
®
HI
LO
Dual-Mode Reactance Amplifier
MAINS INPUT
SERIAL:
117 V
SPKR OUT
LIFT
GROUND
POWER STATION MODEL PS-100
STEVEN FRYETTE DESIGN, INC.
AMP IN
IMPEDANCE
SELECT
LINE OUT
BALANCED
SPEAKER
2/4
8
16
2/4
8
16
200W
MAX
FT SW
AMPLIFIER
FX SEND
LINE IN
FX RETN
FX
LEVEL
LINE OUT
FUSE
MAIN
T4A
50/60 HZ
300 WATTS
AVIS: RISQUES DE CHOC ELECTRIQUE, NE PAS OUVRIR:
WARNING: HAZARDOUS VOLTAGE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL:
CAUTION: DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE:
CAUTION REPLACE ONLY
WITH SAME TYPE FUSE
UTILISER UN FUSIBLE DE
ECHANGE DE MEME TYPE
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
NO USER SERVICABLE PARTS INSIDE
LINE
LEVEL
HI
LO
Amp Speaker Out
All red outlined functions operate without power
No A/C power needed
XLR Line Out
to mixer
Standard ¼“ to ¼“
male speaker cable
4. Silent mode.
USING SILENT MODE
WHEN USING A HIGH-POWERED AMP
CRANKED, YOU MUST RUN THE POWER
STATION WITH THE AC CORD PLUGGED IN
AND THE POWER SWITCH TURNED ON.
IN THIS CASE, LEAVE THE OPRATE/BYPASS
SWITCH SET TO BYPASS.
Silent Mode allows you to use the Power
Station as a silent adjustable reactive load
for quiet direct recording or when sending
a live amp signal to front of house with no
speaker cab connected. In this mode it is not
necessary to power up the Power Station.
You don’t even need to plug in the power
cord. The Voicing switches, FX Send (along
CAUTION! The 200W maximum power ra-
ting of the Power Station’s load depends
on the fan being operational. Running the
Power Station with no AC power disables
the fan and the Maximum Power rating is
reduced by 50%.
with the FX Level switch), Line Out, Line Level
control and the Balanced and Unbalanced
Line Outputs all operate with no AC power
supplied.
