DE
2. Setzen Sie ein Laufwerk in den Träger ein, wobei die Leiterplattenseite nach unten und das
Steckerende zur Rückseite des Trägers zeigt. Richten Sie das Laufwerk im Träger so aus, dass die
Schraubenlöcher übereinander liegen. Beachten Sie die mit "SATA" gekennzeichneten Löcher im
Träger, um die korrekte Installation zu erleichtern.
3. Befestigen Sie das Laufwerk mit den vier M3-Schrauben, die in der Zubehörbox des Gehäuses
enthalten sind, am Träger.
4. Setzen Sie den Laufwerksträger mit dem Laufwerk in den Schacht ein, wobei Sie den Träger so
ausrichten, dass sich die Festplatte oben auf dem Träger und die Entriegelungstaste auf der rechten
Seite befindet. Wenn der Träger den hinteren Teil des Schachtes erreicht hat, wird der Entriegelungs-
griff zurückgezogen.
5. Drücken Sie den Griff nach innen, bis er in seiner verriegelten Position einrastet.
Das Gehäuse ist mit redundanten Netzteilen ausgestattet. Das System arbeitet weiter, wenn ein
Modul ausfällt. Es sollte so bald wie möglich ausgetauscht werden. Die Stromversorgungsmodule
sind im laufenden Betrieb austauschbar, d. h. sie können ausgetauscht werden, ohne das System
auszuschalten.
Diese Netzteile können automatisch umgeschaltet werden. Diese Funktion ermöglicht es ihnen, die
Eingangsspannung automatisch zu erkennen und mit 100-120 V oder 180-240 V zu arbeiten.
1. Setzen Sie die Luftabdeckung wie unten dargestellt in das Gehäuse ein.
2. Richten Sie die Kerbe an der Luftabdeckung mit dem Stift an der Erweiterungskartenhalterung
aus.
3. Schieben Sie den Stift hinten in die Kerbe.
4. Senken Sie die Vorderseite der Luftabdeckung über den Lüftereinschub, indem Sie die vorderen
Kerben über die Stifte am Lüftereinschub schieben.
Installation der Luftabschirmung
Stromversorgung
48
Leichentücher