9
Open a web browser and on the address bar, enter the IP address of the
CCU as follows:
When
an authentication window is displayed,
login with
username:admin password:admin
From the page that will be displayed in the browser, enter the parameters
accordingly to the LAN where the Stick Shaker will be actually used
leave "Enable DHCP" deactivated
enter the "IP Address" for the Stick Shaker CCU device. For example, if the
LAN where the Stick Shaker will be actually used is based on range "10.0.0.x"
and .199 is free, enter
10.0.0.199 (otherwise just enter the IP address
suitable for your LAN)
leave the "Subnet Mask at 255.255.255.0 or set it to match your LAN setup
leave the "HTTP Port" at 80
set both Source and Destination UDP port to a number not used by any
other device. The default value of 12345 is usually fine.
Click Save Config.
Summary of Contents for 116526
Page 2: ......
