This doc
u
ment is co
py
ri
g
ht
!
E
ve
ry
d
upl
ic
ati
o
n
, ut
ili
z
ati
on
or
di
ss
em
in
a
ti
o
n m
u
s
t be
au
tho
ri
se
d
b
y F
E
R
N
S
TE
U
E
R
G
ER
Ä
T
E G
m
bH
.
Dokumenten - Nummer:
5930Z02-BA:03
S.Pfeiffer
Ausgabe:
08.02.2006
www.fernsteuergeraete.de
E-Mail: info@fernsteuergeraete.de
page
5
of
8
General information
Please read this document carefully before using the Rope Length Transmitter. Pay attention to the
safety instructions! Improper handling and carelessness while mounting, damages at the device or
accidents can happened. The mounting instructions are part of your product. Please keep them close
to the device.
Intended use
Your are only allowed to mount, use and maintain the Rope Length Transmitter if you
•
have read and understood the mounting instructions
•
are a specialist
•
are authorized by your company.
The Rope Length Transmitter should only be used according to the technical data. Unauthorized
modifications on the Rope Length Transmitter are not allowed. For resulting damages, we do not take
liability. In case of further developments we reserve the right of technical changes.
Safety instructions
During the normal operation no dangers existing after our level of knowledge. The biggest danger is a
braking wire, which can only be happened while fault using or while not keeping the operation
parameter.
Possible reasons for a broken or damaged wire
•
Exceed of the maximal measuring length
Damages at the wire through sharp edges and/or objects in the measuring range
(The measuring range has to be free and secured so that there is no possibility to damage the
measuring wire)
•
Wire has been squeezed or dejected
Do not pull directly on the wire to avoid kinks/damages! Please only pull on the wire end ring!
Please do never led draw in the measuring wire unhindered (pull out the measuring
wire and led snap back)!
Switch off the voltage of all devices which are concerned of the mounting!
Do not open the device, as the biased power spring can force dangerous injuries!
Mounting the device
The device should stand on a ground level and should be mounted via the winding thrills which are
situated on 2 housing sides. The size and the distance of the winding thrills can be found on the drawing.
While mounting, please pay attention that the wire outlet is aligned to the wire end ring. As soon as the
Rope Length Transmitter is fastened, the wire end ring can be fastened at a moveable object.
Attention! Please hold the wire very tight.
If the wire snap back it can cause damages at the wire and injuries!
The following application hints has to be taken into consideration.
Mounting and
operating instructions
for Rope Length Transmitter of version SL3000
