Latch front face
cut thru
outline
TEMPLATE
Position this line to
your marking.1mm
clearance has been
added.
5 sizes of extension lips are available
5mm,15mm, 25mm, 50mm and 75mm
Depth of cut-out will vary dependent on width of door frame
De
p
th
Lipless
10mm Lip
Standard
15mm Lip
40mm
162mm
123.1mm
NOT TO SCALE
29.0
44.8
*These dimensions have a tolerance of +0.8mm/-0
176.0
Keeper
INSTALLATION
If frame is not prefabricated, use the enclosed stick-on template to prepare strike cut-out in frame.
Install strike as described in diagram.
POSITION OF DOOR LATCH
As drawn in the diagrams, there should be a 1mm gap between the door latch and the front face of the strike keeper, preventing the door from
creating back pressure on the strike keeper when the door is closed.
