background image

 

D-700C  
TOP ASSEMBLY 
EXPLODED VIEW

 

 

9

 

TM-D-700C 

Rev.: - 

Date: 12-29-09 

© 2009 Fastening Systems Int’l, Inc.

 

Supplier’s Federal Identification Code: 64878

 CR# 

09-1506 

For more information please contact FSI Technical Services Department at Tel. 707-935-1170

Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices of 
companies manufacturing industrial or aerospace fasteners.  In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return defective 
goods (after receiving authorization from Seller) for replacement or refund of the purchase price, at the Seller’s option.  Seller agrees to any freight costs in 
connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming goods or installation of replacement goods 
shall be Buyer’s responsibility.  SELLER’S WARRANTY DOES NOT APPLY WHEN ANY PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE 
PRODUCT IS MADE BY BUYER.   
THE FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL  OTHER WARRANTIES AND REMEDIES; 
ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND 
EXCLUDED BY SELLER. 

 

THIS WARRANTY IS VOID IF SELLER IS NOT NOTIFIED IN WRITING OF ANY REJECTION OF THE GOODS WITHIN ONE 

(1) YEAR AFTER INITIAL USE BY BUYER OF ANY POWER RIVETER OR NINETY (90) DAYS AFTER INITIAL USE OF ANY OTHER PRODUCT. 

 

WARRANTY

 
 
  
  
  
  
  
  
  

 
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in part from any breach by Seller, AND SUCH 
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARE HEREBY EXPRESSLY EXCLUDED.

  

  

  

  

Summary of Contents for D-700C











Reviews: