C01-9
1) Scoreboard connections:
•
The scoreboard should be supplied with a 230V mains supply.
•
The mains supply should be fed through
and it is highly recommended that the supply should be fed through
a Residual Current Device (RCD)
•
If the scoreboard has been supplied with a separate aerial this
should be mounted as high as possible
2) Changing Scores
(a) Press and release REFRESH/INNINGS
sent to the scoreboard.
(b) Press and hold REFRESH/INNINGS
button. The Total WICKETS OVERS
whatever the Total was.
(c) Press and hold REFRESH/INNINGS
flashes to make all 0.
(d) To change scoreboard press
times & then release -
(e) At any time, pressin
all data again.
Scoreboard connections:
The scoreboard should be supplied with a 230V mains supply.
The mains supply should be fed through a 5 Amp circuit breaker
and it is highly recommended that the supply should be fed through
a Residual Current Device (RCD).
If the scoreboard has been supplied with a separate aerial this
should be mounted as high as possible.
) Changing Scores:
ress and release REFRESH/INNINGS - current stored info is
scoreboard.
REFRESH/INNINGS until led flashes
otal WICKETS OVERS set to 0 and 1st Inns to
Total was.
REFRESH/INNINGS for second time
) To change scoreboard press
keys required number of
wait until the data sent.
ng the REFRESH/INNINGS briefly
Page 2 of 4
The scoreboard should be supplied with a 230V mains supply.
mp circuit breaker
and it is highly recommended that the supply should be fed through
If the scoreboard has been supplied with a separate aerial this
current stored info is
until led flashes - release
set to 0 and 1st Inns to
for second time until led
keys required number of
briefly will resend
Summary of Contents for C01-9
Page 1: ...C01 9 ...
Page 3: ...C01 9 Page 3 of 4 ...
