11
Placement of SuperVAT™
The SuperVAT™ consists of the metal frame, acrylic bottom, SuperVAT™ liner, and two
retention thumb screws. Be sure that all your components are clean and that any packaging
and protective films have been removed.
Do not
remove yellow Kapton tape from the
SuperVAT™.
● Peel away the protective film on the acrylic bottom.
● Remove the two retaining screws from the metal frame. These thumb screws will
require no tools.
● Set the SuperVAT™ liner into the metal frame. Be sure that the bottom lies flush to the
acrylic bottom.
● Replace the two thumb screws. The face of the screws should be on the inside of the
vat.
To attach the assembled SuperVAT™ to the machine:
Summary of Contents for Phoenix Touch
Page 1: ...1 Main Menu ...
Page 8: ...8 Main Menu ...
Page 32: ...32 Main Menu ...
Page 42: ...42 Transport Information Not regulated for transportation Main Menu ...