26
Network Printing
If your printer is connected to a network by ethernet or wifi, RetinaCreate will display the
connected printers on the upper left side of your screen.
When the printer is ready you will see a green circle, the word ‘Idle’, and the printer’s IP
address. Your printer’s IP address can be found at the lower left corner of the touch screen.
Click the green circle with a triangle to transfer your file to the printer.
The file will not print automatically. It will take a minute for the menu to pop up on the printer.
When the file has transfered, follow the steps on the touchscreen of the computer to begin
printing.
Do not
disconnect your network until the print has started.
Print from USB
Click off of the model into the background space of the work area to deselect it. When
unselected, the menu will have a “Save As Job” option. “Save Scene”
will not
create a
printable file. Save the job file to the USB drive you’ll be using to print.
Connect your USB drive to the USB port on your printer. Select the USB icon on the top of the
screen. This may take 510 seconds to appear. If it doesn’t appear, power your printer off then
on again keeping the flash drive plugged in. Press the print button and follow the directions on
the screen until it begins printing.
Summary of Contents for Phoenix Touch
Page 1: ...1 Main Menu ...
Page 8: ...8 Main Menu ...
Page 32: ...32 Main Menu ...
Page 42: ...42 Transport Information Not regulated for transportation Main Menu ...