background image

3

8/2021 

WUH4000 Wireless Imaging System

Carefully read all instructions prior to use. Observe all contraindications, warnings and 
precautions noted in these directions. Failure to do so may result in patient complications.

Device Description

The 60Ghz WUH4000 transmitter wirelessly transmits high quality audio and video to a paired 
WUH4000 receiver in a typical operating room. The transmitter is designed to be connected to a 
video source (such as an endoscopic camera) with the receiver connected to a video monitor.

Two WUH4000 transmitter/receiver systems operating at diff erent frequencies within the 60Ghz 
band can be used simultaneously within the same room. 

The WUH4000 is designed to be unaff ected by cell phones, RFID, wireless 802.11 b/g/n. The 
60Ghz operating frequency cannot pass through walls and will work within a 10m radius. 256-bit 
AES encryption ensures that no other devices can speak with the WUH4000. 

The WUH4000 transmitter dimensions are:
75.8 mm (2.98 in.) high x 140 mm (5.51 in.) wide x 98.25 mm (3.87 in.) deep.
Weight is approximately .57 kg (1.25 lbs). 

The WUH4000 receiver dimensions are: 
75.8 mm (2.98 in.) high x 55 mm (2.17 in.) wide x 98.25 mm (3.87 in.) deep.
Weight is approximately .23 kg (.5 lbs). 

Both components are mains powered (100 – 240 V).

The WUH4000 wireless device is a non-sterile reusable device not intended for use in the sterile fi eld. 

Caution: Federal (U.S.A.) law restricts this device to sale by or on the order of a physician.

 

Part Number 

Transmitters 

Receivers 

Designed for FHD 

Designed for 4K

 FHD-1TX-1RX 

 FHD-1TX-2RX 

 WUH4000 

 

 WUH4000-D 

 

AV Source

Transmitter (TX)

Receiver (RX)

Destination

Product Description / Intended Use

Summary of Contents for FHD-1TX-1RX













































Reviews: