FSR Demo 8, Owner'S Manual

4

FORK SETUP INFORMATION

WARNING! Demo frames are compatible ONLY with dual crown forks that have 

travel of 8” (203mm) or less. 

Use of different styled forks or forks with longer 

travel may result in catastrophic failure of the frame which may result in serious 

personal injury or death.

SEATPOST SETUP INFORMATION

100mm

Minimum Seatpost

Insertion Guide Hole

SEATPOST MINIMUM INSERTION:

 To 

prevent damage to the frame, it’s important to 
have a minimum amount of seatpost in the seat 
tube.

Aluminum frames:

If you cannot see the seatpost tube through 

the seat tube hole, your seatpost is too far 
extended. If a greater saddle height is required, 
replace the seatpost with a longer one.

BOTTOM BRACKET SPECIFICATION

The Demo frame is equipped with the PF-30 DH 83mm wide bottom bracket shell 

configuration and PF-30 DH threaded cups. This provides compatibility with current 
83mm DH spec cranks for threaded shells, as well as compatibility with future oversized 

crank configurations.

ACCESSORIES

Specialized offers replacement chainstay protectors, available through your 

Specialized authorized dealer.