1-GANG/2-GANG CONFIGURATION
1-GANG/3-GANG CONFIGURATION
2-GANG/2-GANG CONFIGURATION
3-GANG/1-GANG CONFIGURATION
4-GANG CONFIGURATION
GANG MOUNTING BRACKET CONFIGURATION
PER CUSTOMER SPECIFICATIONS, CONFIGURE GANG MOUNTING BRACKETS AS SHOWN BELOW AND
REASSEMBLE INTO BOX (DECORA WALL PLATES SHOWN AS REFERENCE AND NOT INCLUDED).
COVER PLATE
GANG
MOUNTING
BRACKET
OPTIONAL DIVIDER
GANG
MOUNTING
BRACKET
OPTIONAL DIVIDER
GANG MOUNTING BRACKET
OPTIONAL
DIVIDER
GANG MOUNTING BRACKET
OPTIONAL DIVIDER
DIVIDER
HOLDER
DIVIDER
HOLDER
DIVIDER
HOLDER
(2) DIVIDER
HOLDER
GANG MOUNTING BRACKET
(2) DIVIDER HOLDER
(NO DIVIDERS USED)
REMOVABLE LARGE CENTER DIVIDER
REMOVABLE SMALL
CENTER DIVIDER
REMOVABLE SMALL
CENTER DIVIDER
REMOVABLE LARGE CENTER DIVIDER
CENTER DIVIDER CONFIGURATION (NOT APPLICABLE ON 4" BOX)
SET ASIDE TEMPORARY COVER AND SCREWS FOR POSSIBLE RE-INSTALLATION.
REMOVE AND RETAIN GANG MOUNTING BRACKETS AND SCREWS TO CONFIGURE
CENTER DIVIDERS.
Vinyl or Stained Concrete, Cover types - SLD-ALM, SLD-Color
Wood / Floating Wood, Cover types - BK, SS, BRS (1/8"), SLD-ALM, SLD-Color (3/8")
Wood / Floating Wood, Cover types - BLP, BSQ, B, SLP, SSQ, S
POSSIBLE GANG DIVIDER LOCATION
BOTH GANG MOUNTING BRACKETS ARE IDENTICAL, AS IS THEIR CONFIGURATION CAPABILITY
COVER FLUSH WITH CONCRETE
(FOR 3/8" THICK COVER)
VINYL FLOORING
STAINED FLOORING
CONCRETE
FINISHED
FLOOR
3/8" THICK COVER
SHIM TO VINYL
THICKNESS
FLOOR BOX
CONCRETE
FLOOR BOX
3/8" THICK COVER
CONCRETE
TEMPORARY
COVER
SHIM 1/4"
FLOOR BOX
SCREED FLUSH
CONCRETE
FLOOR BOX
TEMPORARY
COVER
1/4" (SEE NOTE)
FINISHED
FLOOR
CONCRETE
FINISHED
FLOOR
1/8" THICK
COVER
FLOOR BOX
SLEEPER
SYSTEM
(IF USED)
CONCRETE
SLEEPER
SYSTEM
(IF USED)
FLOOR BOX
FINISHED
FLOOR
3/8" THICK
COVER
COVER ABOVE CONCRETE
(FOR COVER WITHOUT EDGING)
WOOD FLOORING
WOOD FLOORING
CONCRETE
EDGING
HEIGHT
FLOOR BOX
TEMPORARY COVER
FINISHED
FLOOR
FINISHED FLOOR
CONCRETE
SLEEPER SYSTEM (IF USED)
1/8" THICK COVER
WITH EDGING
FLOOR BOX
COVER ABOVE CONCRETE
(FOR COVER WITH EDGING)
WOOD FLOORING
FOR 3/8" THICK COVER LOWER TEMPORARY
COVER AN ADDITIONAL 1/4" FROM FINISHED
FLOOR DIMENSION OR USE SHIM KIT
NOTE:
TYPICAL INSTALLATION HEIGHTS
FLOOR BOX TEMPORARY COVER WILL EITHER BE INSTALLED DIRECTLY ON THE BOX OR SHIMMED
BASED ON THE COVER AND FLOORING SPECIFICATIONS. SHIM KITS SOLD SEPARATELY (FL-500P-CSK).
THE TEMPORARY COVER MAY NOT BE FLUSH WITH THE FINISH FLOOR IN ALL INSTALLATIONS.
