Copyright © 2009 Future Technology Devices International Limited
14
Document Reference No.: FT_000151
DS_US232R-10(R-100)
USB TO RS232 ADAPTER CABLE Data
Sheet
Version 1.0
Clearance No.: #
99
Figure 3-4 Automatic Install
5)
Wait while the driver is found, downloaded, and installed. This step may take a couple minutes
depending on the Internet speed.
6)
After the files are found and installed, click “Finish” to complete the installation.
Figure 3-5 Complete Hardware Installation
7)
Steps 2 through 6 will repeat. The first time installs the basic USB Serial Converter in the USB
device tree. The second time installs the Virtual COM Port layer in the Ports tree and assigns the
COM port number.
8)
When both portions of the device driver have been installed successfully, the following message
will appear, indicating that the device is ready.
Figure 3-6 Hardware Ready