Quick installation Guide ATLAS 64
We reserve the right to make technical changes without prior notice
.
The manufacturer accepts no liability arising from printing errors.
- 12 -
ATLAS 64 Version en_1.1 (Fte maximal)
Pid Settings
When check the option
Block Private Data,
the headend block with irrelevant PID information.
Only allow in the output the PID as video, audios, CAS
….
6.3.2.
Network
In the network setting several settings of the Network could be modified as the ONID, NID, the
name, the version and Private Data Specifier.
ONID
: In this option enter the value of original network ID.
The allowed values are between 1 and 65535.
NID
: Type here the value of the Network ID. The allowed
values are between 1 and 65535.
Network Name
: Type here the name of the network.
Version
: Type the value of the network version. The allowed
values are between 1 and 31.
Private data Specifier
: Select between the next values:
EACEM
,
ITC
and
Nordig
.
Press
Apply
to confirm the new settings.
6.4.
Menu CAM
6.4.1.
Settings
Use this menu to change the settings of the CAM.
Type
: Select the type of the CAM.
•
Choose
LOW-SPEED
(option by default)
for first generation CAM. Theses models
only support 50 Mbps.
•
Choose
HIGH-SPEED
for
second
generation CAM. These models support
until 100 Mbps.
Watchdog:
The watchdog monitoring the CAM and check all the services pass through the
CAM are decrypting. If one or several services are not decrypting the watchdog do a reset in
the CAM to try to decrypt again the services
Remark
: The watchdog must be enabled only when all services are decrypting correctly by the CAM.
Enable
: When this option is checked the CAM is enabled (default value).
Click the button
Apply
to confirm the new values.
