User’s manual · MAX IP90
Technical changes and mistakes reserve
-
3
-
MAX IP90 Version en_1.0
FTE Maximal
0. Control elements and connections
0.1. Receiver front panel
1 2 3 4 5 6
1 POWER:
Switches the receiver ON or in Standby mode. For total switching off, use the main
switch at the back side of the receiver.
2 POWER
LED:
Indicates that the mains voltage (90-230 VAC) is available.
3
LOCK LED:
Indicates a sufficient signal level at the input
4 DISPLAY:
4 Digits to display the program numbers.
5 IR-SENSOR:
Reception sensor for the IR remote control signals
6 BUTTONS:
These buttons allow controlling the main functions of the receiver, and
provide the same functionality as the remote control ones.
0.2.
Receiver back panel
1 2 3 4
5 6 7 8
1 ETHERNET:
Network connection of the receiver.
2 RS-232:
Serial port to update the firmware of the receiver
3
AC IN:
Power
cord
230VAC/50Hz.
4 POWER
ON/OFF:
Main switch to switch off totally the receiver
5 AUDIO:
Audio output for home audio systems
6
VIDEO:
Video output for external monitor, TFT or video beamer
7 COAXIAL
S/PDIF:
Coaxial output for digital audio (AC3)
8
TV SCART:
SCART output for connecting one TV set
