FTX Outback Mini 2.0, Instruction Manual

3

FAMILIARIZING YOURSELF WITH YOUR 2.4GHZ RADIO SYSTEM

You car is equipped with a 2.4Ghz radio system that once bound with the ESC will provide you interference free use.

Plese read and understand the instructions snd functions before operating.

•  Steering Wheel: Proportionally operates the model left to right

•  Battery Case: Requires 4 x AAA Batteries

•  Power Switch: Used to turn the radio ON/OFF

•  Steering Dual Rate: Allows you to change the amount of  steering servo travel compared to the amount of physical steering wheel  

 movement

•  Throttle Dual Rate: Allows you to change the amount of throttle movement compared to the amount of physical throttle trigger 

 movement

•  Throttle/Steering Trims: Used to adjust the centre trim of the throttle/steering for straight wheels and neutral throttle

•  Steering Reverse: Allows you to electronically switch the direction of the steering servo travel. For example if you move the 

steering wheel to the right and the steering servo moves to the left, use the reverse button to switch the steering to the right. 

•  Throttle Reverse: Allows you to electronically switch the direction that the motor operates in relation to the throttle trigger. For 

example if you pull the trigger to accelerate forward, but the model goes in reverse, use the reverse button to switch to make the 

model accelerate forward

•  Throttle Trigger: Controls the speed and braking ability of your model. Pull back to accelerate, release to decelerate and push 

forward for brake

•  LED Indicators: Show battery power level. Replace batteries when the power indicator blinks or the buzzer beeps

LED INDICATOR

REVERSE 

BUTTON

3RD CHANNEL

STEERING 

DUAL RATE + & 

STEERING TRIM +

STEERING 

DUAL RATE - & 

STEERING TRIM -

THROTTLE DUAL RATE + 

& THROTTLE TRIM +

THROTTLE DUAL RATE - 

& THROTTLE TRIM -

POWER SWITCH

STEERING WHEEL

BATTERY CASE

THROTTLE TRIGGER

BATTERY INSTALLATION

1.  Slide the battery cover off as shown and 

install 4 x AAA size batteries, positioning the 

polarity as indicated on the battery box. 

2.   Replace cover after batteries are installed. 

Notes:

•  Use batteries of the same type

•  Remove batteries when not in use

•  Always check battery power before use

•  Dispose of exhausted batteries properly

•  Only charge rechargable batteries when using charge jack

FTXOBmini2.0Man.indd   3

08/05/2019   10:46