User bands
Power Pack
Power Pack
Terminated Outputs
Legacy
Legacy
Legacy
Legacy
7
7
6
6
5
5
4
4
3
3
2
2
1
1
0
0
Einkabel-Multischalter
Unicable™ Multiswitch
MCR 918
Einkabel-Multischalter
Unicable™ Multiswitch
MCR 918
5
GB
Installation manual
Before installing and operating the product, please read the
following instructions and recommendations.
We suggest that you keep this manual for future use.
Warranty
The Unicable multiswitch is designed for the distribution of satellite and
terrestrial television and radio signals in home installations. The warranty does
not apply for products used for other purposes than those specified herein.
The user/installer shall be responsible for any damage incurred as a result
of not using the product according to the instructions in this manual.
Installation location
The product shall be installed on a wall or other hard inflammable surface in
a dry environment where it is not exposed to rain or running water.
Do not install the product close to heat sources or in places exposed to direct sunlight.
The product shall be in no case held only with the connected cables.
Product installation
To connect the product inputs and outputs use high-quality coaxial cables designed for
satellite reception and F-connectors. Use high-shielding coaxial cables with minimum 90 dB.
If you use wall sockets to loopthrough the 8 user bands, make sure
the wall sockets were designed for satellite reception compatible with
Unicable technology and allows bidirectional signal propagation.
The following diagram describes the installation configurations supported by the product:
