7
STEP 4:
1. Locate the Pedal Axle Spacer (25) and Right side Pedal Arm Assembly (2) and
install onto the pedal axle at the large rotating wheel at the rear of the elliptical. Use
the M5 Allen Wrench (67) to tighten the 5/16” Button Head Socket Bolt
(91), 5/16"
Split Washer (46)
and 5/16” Flat Washer (44).
2. Locate the 1/2" × 2-3/4” Carriage Bolt (29) and slide through the bracket at the front
of the Pedal Arm Assembly (2) and Lower swing arm (6). Use the19m/m Wrench (68)
to tighten the 1/2" Nyloc Nut (30) to the carriage bolt (29).
3. Repeat steps 1&2 above for the left side pedal arm assembly.