2
2017 Fueltec Model CF50E Fuel Polishing System
WARNING
This product operates in the highly combustible atmosphere of a diesel or gasoline storage tank.
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY PRECAUTIONS
COULD CAUSE DAMAGE TO PROPERTY, ENVIRONMENT, RESULTING IN SERIOUS INJU-
RY OR DEATH.
•
This fuel polishing system should NEVER BE OPERATED inside a truck cargo body, enclosed
trailer, or within fifty (50) feet of an operating or hot engine, motor or fuel dispenser.
•
All work must comply with the latest issue of the National Electrical Code (NFPA 70), the Code for
Motor Fuel Dispensing Facilities and Repair Garages (NFPA 30A), and any European, national,
state, and local code requirements that apply.
•
When servicing unit, use non
-
sparking tools and use caution when removing or installing equipment
to avoid generating a spark.
•
To protect yourself and others from serious injury, death, or substantial property damage, carefully
read and follow all warnings and instructions in this manual.
Warnings and Instructions
This section introduces the hazards and safety precautions associated with operating, maintaining or
servicing this product. Before performing any task on this product, read this safety information and the
applicable sections in this manual, where additional hazards and safety precautions for your task will
be found. Fire, explosion, or pressure release could occur and cause damage to property, environment,
resulting in serious injury or death, if these safe service procedures are not followed.
PRELIMINARY PRECAUTIONS
You are working in a potentially dangerous environment of flammable fuels, vapors, and fluid pressures. Only trained or
authorized individuals knowledgeable in the related procedures should operate, inspect, maintain or service this equipment.
Read the Manual
Read, understand and follow this manual and any other labels or related materials supplied with this equipment. If you do
not understand a procedure, call 1
-
828
-
212
-
1141 to locate a qualified technician. It is imperative to your safety and the safe-
ty of others to understand the procedures before beginning work.
Make sure your employees and any service
contractors
read and follow the instructions.
Follow the Regulations
Applicable information is available in National Fire Protection Association (NFPA) 30A; Code for Motor Field Dispensing
Facilities and Repair Garages, NFPA 70; National Electrical Code (NEC), Occupational Safety and Hazard Association
(OSHA) regulations and federal, state, and local codes. All these regulations must be followed. Failure to operate, inspect,
maintain or service this equipment in accordance with these codes, regulations and standards may lead to legal citations
with penalties or affect the safe use and operation of the equipment. OSHA fall protection rules apply when working on
above ground fuel storage tanks.
