WWW.FUHR.DE
11
SmartTouch
2.0
4 Tuning in and deleting SmartKeys
Note: If you exceed the 20 seconds or use the wrong master SmartKey, the tuning in process
will be cancelled.
4.1 Tuning in the SmartKeys
For security reasons, we recommend to clear the memory of the Smart radio module when first
placing the system into operation. This prevents unauthorised persons from tuning in a Smart
Key. Delete all SmartKeys as described in chapter 4.3 and start afterwards with the tuning in
process.
1 x
2 x
within 20 Sek.
within 20 Sek.
1. Carefully press the programming button on the Smart radio module
for approx. 1 second.
The green LED of the Smart radio module lights up for approx.
2 seconds and then starts flashing slowly.
2. Press the tuning in and opening button on your master SmartKey
within 20 seconds once.
The green LED of the Smart radio module lights up for 2 seconds and
then starts flashing at one-second intervals.
3. Press the transmit button on the SmartKey to be tuned in within
20 seconds, twice.
The green LED of the Smart radio module lights up for 4 seconds and
afterwards turns off automatically.
4. The tuning in process is finished and the SmartKey can be used for
door opening.
Advice:
If there is a SmartTouch door handle installed, it beeps by
touching and the door can be opened.
ca. 1 sec.
