WWW.FUHR.DE
12
SmartTouch
2.0
You can remove the opening authorisation of each SmartKey individually. To delete a single SmartKey from the
memory of the Smart radio module, proceed as follows:
4.2 Delete individual SmartKeys
1 x
within 20 sec.
1. Carefully press the programming button on the Smart radio module
for at least 3 seconds.
As soon as the push-button is released, the green LED of the Smart
radio module starts flashing rapidly.
2. Press the tuning in and opening button on your master SmartKey
within 20 seconds once.
The green LED of the Smart radio module lights up for 2 seconds and
then flashes rapidly again.
3. Press the transmit button on the user SmartKey you want to delete,
within 20 seconds once.
The green LED of the Smart radio module lights up for 4 seconds and
afterwards turns off automatically.
4. The deleting process is completed. Check by pressing the transmit
button on the user SmartKey if the deleting process was successful.
1 x
within 20 sec.
> 3 sec.
