8-4
8.1.3 Single-phase 200 V class series (
= A, C, E or U)
Item
Specifications
Type (FRN_ _ _ _ C2S-7
)
0001
0002
0004
0006
0010
0012
Applicable motor rating (kW)
*1
0.1
0.2
0.4
0.75
1.5
2.2
Applicable motor rating (HP)
*1
1/8
1/4
1/2
1
2
3
Output Ratings
Rated capacity (kVA)
*2
0.30
0.57
1.3
2.0
3.5
4.5
Rated voltage (V)
*3
Three-phase, 200 to 240 V (with AVR function)
Rated current (A)
*4
0.8
(0.7)
1.5
(1.4)
3.5
(2.5)
5.5
(4.2)
9.2
(7.0)
12.0
(10.0)
Overload capability
150% of rated current for 1 min
150% of rated current for 1 min or 200% of rated output current for 0.5 s
(for the rated current given in parentheses)
Rated frequency (Hz)
50/60 Hz
Input Ratings
Phases, voltage,
frequency
Single-phase, 200 to 240 V, 50/60 Hz
Voltage and
frequency variations
Voltage: +10 to -15%, Frequency: +5 to -5%
Rated
current (A)
*7
(w/
DCR)
1.1
2.0
3.5
6.4
11.6
17.5
(w/o
DCR)
1.8
3.3
5.4
9.7
16.4
24.0
Required power
supply capacity (kVA)
*8
0.3
0.4
0.7
1.3
2.4
3.5
Braking
Torque (%)
*9
150
100
50
30
DC braking
Starting frequency
*10
: 0.0 to 60.0 Hz,
Braking time: 0.0 to 30.0 s, Braking level: 0 to 100%
Braking transistor
--
Built-in
Applicable safety
standards
UL508C, EN 61800-5-1
Enclosure
IP20 (IEC 60529), UL open type (UL50)
Cooling method
Natural cooling
Fan cooling
Mass (kg)
0.6
0.6
0.7
0.9
1.8
1.9
Mass (lbs)
1.3
1.3
1.5
2.0
4.0
4.2
*1 Fuji 4-pole standard motors
*2 Assuming the rated output voltage as 220 V.
*3 Output voltages cannot exceed the power supply voltage.
*4 The load shall be reduced so that the continuous operating current is the rated current in parenthesis or less if
the carrier frequency is set to 3kHz or above or ambient temperature exceeds 40°C(104°F).
*7 Estimated value to apply when the power supply capacity is 500 kVA (inverter capacity x 10 when the inverter
capacity exceeds 50 kVA) and the inverter is connected to the %X = 5% power supply.
*8 Values to apply when a DC reactor (DCR) is used.
*9 Average braking torque to apply when the motor running alone decelerates from 60 Hz with the AVR control
being OFF. (It varies with the efficiency of the motor.)
*10 Available only for induction motor drive.
