manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Administrator'S Manual

The Fuji Xerox ApeosPort-V 4070 is a versatile multifunction printer designed for office use. To optimize its features, the Administrator's Manual is a comprehensive guide that can be downloaded for free from our website, providing step-by-step instructions and configuration options to enhance productivity and efficiency.

Share
Download
background image

Scan Service Settings

211

Tools

5

Scan Service Settings

In [Scan Service Settings], you can configure settings related to the Scan services.

Note

•

This feature does not appear for some models. An optional component is required. For more 
information, contact our Customer Support Center.

•

When [Scan to Fax Server] is selected in the System Settings, [Scan Service Settings] is replaced with 
[Scan/Fax Service Settings].

For information on scanner environment settings, refer to "Scanner Environment Settings" (P.325).

The following shows the reference section for each setting.

Screen Defaults.............................................................................................................................................................................211

Scan Defaults ................................................................................................................................................................................212

Scan to PC Defaults .....................................................................................................................................................................215

Original Size Defaults ..................................................................................................................................................................215

Output Size Defaults....................................................................................................................................................................216

Reduce/Enlarge Presets ..............................................................................................................................................................216

Other Settings ...............................................................................................................................................................................216

1

On the [Tools] screen, select [System Settings] > [Scan Service Settings].

For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.110).

2

Select an item to set or change.

Screen Defaults

You can set the items that appear in the First Tab screen. The First Tab means the screen 
displayed when you select the following tabs in the [E-mail], [Store to Folder], [Network 
Scanning], [Scan to PC], [Store & Send Link], and [Store to USB] screens.

z

The [E-mail] tab of the E-mail service

z

The [Store to Folder] tab of the Store to Folder service

z

The [Network Scanning] tab of the Network Scanning service

z

The [Scan to PC] tab of the Scan to PC service

z

The [Store & Send Link] tab of the Store & Send Link service

z

The [Store to USB] tab of the Store to USB service

Email Screen Default

Set the default screen that appears when [E-mail] on the Services Home screen is selected. 
Select from [Scan Tab] and [Address Book].

Scan to PC Screen Default

Set the default screen that appears when [Scan to PC] on the Services Home screen is 
selected. Select from [Scan Tab] and [Address Book].

1st Tab - Features Allocation

You can set the features that appear in the second to the fourth column of the lower part in 
the First Tab screen.

Select a column by choosing from [Feature in 1st Column] to [Feature in 4th Column]. And 
set the item to be displayed from [Not Selected], [Color Scanning], [2 Sided Scanning], 

Summary of Contents for ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V 4070

Xerox B210 Manual preview
B210
Brand: Xerox Pages: 73
Xerox B210 Installation Manual preview
B210
Brand: Xerox Pages: 2
NEC 870 - SuperScript B/W Laser Printer Network User'S Manual preview
870 - SuperScript B/W Laser Printer
Brand: NEC Pages: 52
NEC SuperScript 1800 Quick Start Manual preview
SuperScript 1800
Brand: NEC Pages: 8
BIXOLON SRP-500 Driver Installation Manual preview
SRP-500
Brand: BIXOLON Pages: 31
Konica Minolta BIZHUB 650 Installation And Use preview
BIZHUB 650
Brand: Konica Minolta Pages: 2
Xerox AltaLink B8045 Security Manual preview
AltaLink B8045
Brand: Xerox Pages: 70
Evolis EDIKIO FLEX User Manual preview
EDIKIO FLEX
Brand: Evolis Pages: 45
Seiko Epson P130A Manual preview
P130A
Brand: Seiko Epson Pages: 301
Ricoh Aficio 2022 Service Manual preview
Aficio 2022
Brand: Ricoh Pages: 849
Oki ES4140dn User Manual preview
ES4140dn
Brand: Oki Pages: 69
Olivetti d-Copia 1801MF Plus Service Manual preview
d-Copia 1801MF Plus
Brand: Olivetti Pages: 492
Oki ES9160 Maintenance Manual preview
ES9160
Brand: Oki Pages: 1087
Lexmark 4039 - B/W Laser Printer Parts List preview
4039 - B/W Laser Printer
Brand: Lexmark Pages: 49
Lexmark 5200 Series Setup preview
5200 Series
Brand: Lexmark Pages: 64
Epson Stylus CX7300 Series Service Manual preview
Stylus CX7300 Series
Brand: Epson Pages: 20
Epson Stylus CX6900 Series User Manual preview
Stylus CX6900 Series
Brand: Epson Pages: 40
Epson Stylus NX125 Series Start Here preview
Stylus NX125 Series
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands