manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Administrator'S Manual

The Fuji Xerox ApeosPort-V 4070 is a versatile multifunction printer designed for office use. To optimize its features, the Administrator's Manual is a comprehensive guide that can be downloaded for free from our website, providing step-by-step instructions and configuration options to enhance productivity and efficiency.

Share
Download
background image

Notes and Restrictions

665

A

p

pe
ndi
x

16

z

A message does not appear on the touch screen if you open and close the top cover of the 
document feeder when the document feeder is deactivated (such as when the service to 
use a scanner is not selected). However, the confirmation message appears on the touch 
screen and the <Error> indicator lights up when the document feeder is activated (exits 
the Power Saver mode) while the top cover is open.

z

The confirmation indicator does not light up if the document is loaded while the 
document feeder is in the Power Saver mode (such as when the service to use a scanner 
is not selected). However, the confirmation indicator lights up and the document is 
detected when you load the document and then make the machine exit the Power Saver 
mode.

z

After the machine exits the Power Saver mode, the document feeder and scanner device 
are activated after the document cover is opened while the scanner device is deactivated. 
However, to make the document detected on the document glass, make sure that the 
scanner device in the document glass moves to the detect position for the document size, 
and then close the document cover.

z

After the machine is activated from the Power Saver mode, a message does not appear 
on the touch screen if you perform the following operations while the service to be used 
for the output device, such as copying and secure printing, is not selected.

- Opening and closing the top cover of the document feeder
- Opening and closing the front cover
- Opening the paper tray
- All the operations including opening and closing the front cover of the finisher, and 

pressing the buttons

However, the confirmation message appears and the <Error> indicator lights up when the 
machine is activated (exits the Power Saver mode) while each cover or a paper tray is 
open.

z

After the machine exits the Power Saver mode, the value detected before the machine 
enters the Power Saver mode is displayed or informed as paper tray status and the 
information on the consumables such as the toner remaining amount, status of the drum 
cartridge, and paper, if the service used for the output device is not activated.

z

After the machine exits the Power Saver mode, be careful for the following if you use the 
copy feature before you activate the service used for the output device.

The information displayed such as a paper size specified for the paper tray or the 
remaining amount is detected before the Power Saver mode. If you change the paper size 
or remaining amount during the Power Saver mode, it takes a few seconds for the change 
to be updated on the screen.

z

Exiting the Power Saver mode activates the entire machine when Copy, Simple Copy, or 
Stored Programming is set as the default screen on the touch screen.

z

Exiting the Power Saver mode activates the entire machine when [Paper Tray Attributes 
During Loading] is set to [On].

z

The entire machine exits the Power Saver mode when you press the <Machine Status> 
button, enter the System Administration mode, or select the Stored Programming service.

z

The machine does not exit the Sleep mode when you use the EP service by EP-BB.

z

When [Tools] > [System Settings] > [Connectivity & Network Setup] > [Port Settings] > 
[USB] > [USB - Print Mode] is set to any option other than [Auto], exiting the Power Saver 
mode activates the entire machine.

z

The output device is activated when Secure Print is executed using job tickets of 
ContentsBridge Utility.

Summary of Contents for ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V 4070

Oki T400 Guía De Instalación preview
T400
Brand: Oki Pages: 36
JICCODA LE-1 Quick Install Manual preview
LE-1
Brand: JICCODA Pages: 46
TASKalfa 306ci First Steps preview
306ci
Brand: TASKalfa Pages: 36
Lanier LD225 Function Manual preview
LD225
Brand: Lanier Pages: 138
Lanier LD225 Fax Manual preview
LD225
Brand: Lanier Pages: 236
Pantum P3060 SERIES Manual preview
P3060 SERIES
Brand: Pantum Pages: 115
Lanier LD160c Brochure & Specs preview
LD160c
Brand: Lanier Pages: 6
Colorjet Verve Hybrid Installation And Troubleshoot Manual preview
Verve Hybrid
Brand: Colorjet Pages: 52
Ricoh AficioSP C410DN Hardware Manual preview
AficioSP C410DN
Brand: Ricoh Pages: 204
Avery Dennison 9688 Quick Installation Manual preview
9688
Brand: Avery Dennison Pages: 2
oti OCT Service Manual preview
OCT
Brand: oti Pages: 33
Kyocera FS-1118MFP Installation Manual preview
FS-1118MFP
Brand: Kyocera Pages: 2
Graphic Products DuraLabel 4 User Manual preview
DuraLabel 4
Brand: Graphic Products Pages: 28
Oki CX3535 Safety Information Manual preview
CX3535
Brand: Oki Pages: 64
Xerox VersaLink C400 Manual preview
VersaLink C400
Brand: Xerox Pages: 4
Ricoh Schmidt 3 Installation Manual preview
Schmidt 3
Brand: Ricoh Pages: 8
Oki MPS4200mb Basic User Manual preview
MPS4200mb
Brand: Oki Pages: 181
Xerox 8560/SDN - Phaser Color Solid Ink Printer Quick Use Manual preview
8560/SDN - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 16

Brands by name

Popular brands

Load more brands