manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Administrator'S Manual

The Fuji Xerox ApeosPort-V 4070 is a versatile multifunction printer designed for office use. To optimize its features, the Administrator's Manual is a comprehensive guide that can be downloaded for free from our website, providing step-by-step instructions and configuration options to enhance productivity and efficiency.

Share
Download
background image

16 Appendix

692

A

p

pe
ndi
x

16

„

While Printing

z

When [Receiving Buffer - LPD] is set to either [Spool to Hard Disk] or [Spool to Memory]

If the transmitted print data size exceeds the available capacity of either hard disk or 
memory, the print data is not received.

Note

•

When the print data exceeds the receivable size, some computers may immediately re-transmit the 
print data. In this case, the computer appears to be not operating. Remedy this problem by 
canceling the print data transmission from the computer.

z

When [Receiving Buffer - LPD] is set to [No Spooling]

When the machine receives a print request from a computer, the machine cannot accept 
print requests from any other computers.

z

When a computer's IP address or a computer name is changed

When you change a computer's IP address or a computer name, queries and cancel 
processes submitted from the machine are no longer executed correctly. Thus, turn the 
machine off and on when there is no print data in the receiving buffer.

Note

•

From the control panel on the machine, you can cancel print jobs or force the machine to print the 
jobs remaining in the receiving buffer. For more information on the operation, refer to "11 Job 
Status" in the User Guide.

Notes and Restriction for Using Secondary Ethernet (Optional)

This section describes notes and restrictions to observe when using Secondary Ethernet 
(optional).

z

The exceptions setting dialog box may be displayed when you access CentreWare 
Internet Services using FQDN by Ethernet 2 while enabling [HTTP - SSL/TLS 
Communication].

z

The job log does not record Ethernet1 and Ethernet2 separately. You cannot identify 
which network has transmitted a job.

z

The remaining level of consumables and the meter value information transmitted from 
the machine are identical between Ethernet 1 and Ethernet 2. When you use the software 
which is not supplied by Fuji Xerox to check the machine usage status, please do not set 
IP address to avoid the duplication of machine information. Instead of IP address, set the 
machine-specific information such as UUID depending on the software you use.

z

When [LPD Print Queue] is set to [Job Submission Order], no priority of print order occurs 
between Ethernet 1 and Ethernet 2.

z

The submission, status confirmation (lpq), and cancellation (lprm) of print jobs from 
different hosts which have the same IP address are processed as the same host’s request.

z

Port 9100 receives a print job from single line at one time even when two Ethernet 
interface lines are used.

z

[Get IP Address from DHCP] of [IPv6 - DNS Server Setup] is available only for [TCP/ IP - 
Network Settings (Ethernet 1)]. For [TCP/IP - Network Settings (Ethernet 2)], set the DNS 
server address manually.

z

On the [Properties] tab > [Connectivity] > [Protocols] > [TCP/IP] of CentreWare Internet 
Services, selecting [Enabled] for [Dynamic DNS Registration] of both Ethernet 1 and 
Ethernet 2 may cause the Dynamic DNS registration to fail. Select [Enabled] only for 
either Ethernet 1 or Ethernet 2 to use the Dynamic DNS registration feature.

Summary of Contents for ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V 4070

Samsung SCX-3405FW Manual Del Usuario preview
SCX-3405FW
Brand: Samsung Pages: 347
Samsung SCX 6555N - MultiXpress Mono Multifunction Manual Del Usuario preview
SCX 6555N - MultiXpress Mono Multifunction
Brand: Samsung Pages: 180
Samsung SCX-4300 - SCX 4300 B/W Laser License Agreement preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 18
Samsung SCX-4521FG - B/W Laser - All-in-One User Manual preview
SCX-4521FG - B/W Laser - All-in-One
Brand: Samsung Pages: 215
Samsung SCX 6320F - B/W Laser - All-in-One User Manual preview
SCX 6320F - B/W Laser - All-in-One
Brand: Samsung Pages: 332
Samsung SCX 4828FN - Laser Multi-Function Printer User Manual preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 248
Samsung SCX 4725FN - B/W Laser - All-in-One User Manual preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 253
Samsung ML 2851ND - B/W Laser Printer User Manual preview
ML 2851ND - B/W Laser Printer
Brand: Samsung Pages: 179
Samsung ML 2510 - B/W Laser Printer Manual Del Usuario preview
ML 2510 - B/W Laser Printer
Brand: Samsung Pages: 84
Samsung ML 1740 - B/W Laser Printer Manual Del Usuario preview
ML 1740 - B/W Laser Printer
Brand: Samsung Pages: 152
Samsung ML 1630 - B/W Laser Printer User Manual preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 142
Samsung ML 1630 - B/W Laser Printer Manual Del Usuario preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 82
Samsung SL-M2875FD Installation Manual preview
SL-M2875FD
Brand: Samsung Pages: 2
Samsung M337 User Manual preview
M337
Brand: Samsung Pages: 384
Samsung Lazett Combo SCX-4216F Service Manual preview
Lazett Combo SCX-4216F
Brand: Samsung Pages: 135
Samsung CLX-6260FD Manual Del Usuario preview
CLX-6260FD
Brand: Samsung Pages: 414
Samsung SCX 6555N - MultiXpress Mono Multifunction Administrator'S Manual preview
SCX 6555N - MultiXpress Mono Multifunction
Brand: Samsung Pages: 112
Samsung scx-4100 series Quick Install Manual preview
scx-4100 series
Brand: Samsung Pages: 2

Brands by name

Popular brands

Load more brands