manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Administrator'S Manual

The Fuji Xerox ApeosPort-V 4070 is a versatile multifunction printer designed for office use. To optimize its features, the Administrator's Manual is a comprehensive guide that can be downloaded for free from our website, providing step-by-step instructions and configuration options to enhance productivity and efficiency.

Share
Download
background image

Connectivity & Network Setup

175

Tools

5

Connectivity & Network Setup

In [Connectivity & Network Setup], you can configure settings related to the Connectivity & 
Network feature.

For information on Connectivity and Network Settings, refer to "Printer Environment Settings" (P.303) or "E-mail 
Environment Settings" (P.317).

If you use CentreWare Internet Services, more detailed settings are possible. For more information, refer to "CentreWare 
Internet Services Settings" (P.295).

The following shows the reference section for each setting.

Port Settings ..................................................................................................................................................................................175

Protocol Settings ..........................................................................................................................................................................181

Machine's E-mail Address/Host Name ...................................................................................................................................185

Proxy Server Settings...................................................................................................................................................................186

EP Proxy Server Setup..................................................................................................................................................................187

SIP Settings....................................................................................................................................................................................188

T.38 Settings .................................................................................................................................................................................191

Outgoing/Incoming E-mail Settings........................................................................................................................................191

Remote Authentication/Directory Service..............................................................................................................................193

Security Settings...........................................................................................................................................................................198

Other Settings ...............................................................................................................................................................................203

1

On the [Tools] screen, select [System Settings] > [Connectivity & Network Setup].

For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.110).

2

Select an item to set or change.

Port Settings

Set the interface of the machine connected to a client. In [Port Settings], you can configure 
the following settings.

Important •

For LPD, Port9100, HTTP-SSL/TLS, and SIP, do not use a number that is the same as a port number of 
another port. 
For a port that uses HTTP (IPP, Internet Service (HTTP), UPnP Discovery, SOAP, WebDAV, and Web 
Services on Devices (WSD)), do not use a number that is the same as a port number of LPD, 
Port9100, and HTTP-SSL/TLS.
Furthermore, if any of the above are set to one of the port numbers indicated below, operation may 
no longer be performed properly depending on the setting conditions of the port: 
25, 139, 427, 445, 631, 15000

•

Only LPD, Port9100, SNMP and Internet Services (HTTP) ports are available for Ethernet 2 when two 
Ethernet interfaces are used.

•

Secondary Ethernet (optional) does not support IPP and Google Cloud Print ports. Print submission 
of AirPrint and Google Cloud Print via Ethernet 2 is not available.

For information on HTTP-SSL/TLS port, refer to "HTTP - SSL/TLS Port Number" (P.198).

You can configure the Google Cloud Print port settings in CentreWare Internet Services. For more information, refer to the 
help of CentreWare Internet Services.

Important •

To display the online help for CentreWare Internet Services, users need to have the environment to 
connect to the Internet. The communication fee shall be borne by you.

Summary of Contents for ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V 4070

Canon imagePROGRAF W8400 Driver Manual preview
imagePROGRAF W8400
Brand: Canon Pages: 24
Canon imagePROGRAF TZ-30000 Setup Manual preview
imagePROGRAF TZ-30000
Brand: Canon Pages: 66
Canon imagePROGRAF W7200 Setup Manual preview
imagePROGRAF W7200
Brand: Canon Pages: 126
Canon imagePROGRAFi iPF840 series Basic Manual preview
imagePROGRAFi iPF840 series
Brand: Canon Pages: 149
Canon IPF850 Basic Manual preview
IPF850
Brand: Canon Pages: 166
Canon iP4000 - PIXMA Photo Printer Start Here preview
iP4000 - PIXMA Photo Printer
Brand: Canon Pages: 2
Olympus P 400 Firmware Upgrade Manual preview
P 400
Brand: Olympus Pages: 3
Canon BW Remote Operators Software Kit-A1 Service Manual preview
BW Remote Operators Software Kit-A1
Brand: Canon Pages: 20
Canon imageRUNNER 2420 Trouble Error Codes List preview
imageRUNNER 2420
Brand: Canon Pages: 30
Canon IPF850 Service Manual preview
IPF850
Brand: Canon Pages: 51
Canon imageCLASS LBP325dn Service Manual preview
imageCLASS LBP325dn
Brand: Canon Pages: 252
Datecs PP-55 User Manual preview
PP-55
Brand: Datecs Pages: 73
Datamax H-Class Quick Start Manual preview
H-Class
Brand: Datamax Pages: 12
Datamax E-Class Mark II Maintenance Manual preview
E-Class Mark II
Brand: Datamax Pages: 40
Datamax E-class E-3202 Quick Reference Manual preview
E-class E-3202
Brand: Datamax Pages: 46
Nantian Electronics PR9 Quick Reference Manual preview
PR9
Brand: Nantian Electronics Pages: 4
Oki PACEMARK 4410 Service Manual preview
PACEMARK 4410
Brand: Oki Pages: 215
Panasonic KX-MC6020 Service Manual preview
KX-MC6020
Brand: Panasonic Pages: 486

Brands by name

Popular brands

Load more brands