manualshive.com logo in svg

Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

The Fuji Xerox ApeosPort-V 6080 is a high-performance multifunction printer designed for efficient document management. To maximize its potential, an Administrator's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and invaluable tips to enhance your experience with this exceptional product.

Share
Download
background image

Configuration of E-mail Encryption/Digital Signature

377

En
cr

yp
ti

o

n

 a

n

d

 D

ig

it

a

l 

S

ign
at

ur

e

 S

e

tt

in

gs

13

Select an encryption method for the e-mail message body from [3DES], [RC2-40], [RC2-
64], [RC2-128], [AES-128], [AES-192], or [AES-256] when you send an e-mail from the 
machine.

z

Certificate Auto Store

Select whether to automatically store the certificate when receiving an e-mail with an
S/MIME certificate attached from an address registered in the Address Book.

z

Receive Untrusted E-mail

Set whether or not to receive untrusted e-mails such as an e-mail with expired certificate 
attached or no certificate attached.

z

Digital Signature - Outgoing E-mail

Set whether to always attach a digital signature to an outgoing e-mail or to select a 
digital signature when sending e-mail from the machine.

z

Receive Untrusted Internet Fax

Set whether or not to receive untrusted Internet faxes such as an e-mail with expired 
certificate attached or with no certificate attached.

z

Digital Signature - Outgoing Internet Fax

Set whether to always attach a digital signature to an outgoing Internet fax or to select 
a digital signature when sending Internet fax from the machine.

4) Click [Apply].

Step2 Configuration on Sender and Recipient

To transmit e-mails encrypted or with digital signature attached, a device certificate and a 
personal certificate must be registered with each machine.

This section describes certificates required for destination and source, and registration 
procedures.

Note

•

Required certificates include a trusted root certificate authority and all intermediate certificate 
authorities that are registered in the path of a certificate to use.

„

When source is the machine and destination is a computer

The personal certificate of a computer must be registered on the machine. And the device 
certificate of the machine must be registered on a computer.

To register the computer's personal certificate, use CentreWare Internet Services.

There are two methods to register the machine's device certificate to a computer:

z

Send an e-mail with S/MIME digital signature to a computer from the machine and 
register it to the certificate store of an e-mail application in the computer.

To send an e-mail with S/MIME digital signature, select [Always add signature] or [Select 
during send] for [Digital Signature - Outgoing E-mail] under [Tools] > [System Settings] > 
[Connectivity & Network Setup] > [Security Settings] > [S/MIME Settings] in advance.

z

Export the certificate of the machine to a computer using CentreWare Internet Services, 
and register it to the certificate store of an e-mail application in the computer.

For information on how to import and export a certificate using CentreWare Internet Services, refer to "Importing/exporting 
a certificate using CentreWare Internet Services" (P.378) or the help of CentreWare Internet Services.

Important •

To display the online help for CentreWare Internet Services, users need to have the environment to 
connect to the Internet. The communication fee shall be borne by you.

For information on how to register a certificate to the certificate store of an e-mail application, refer to the manual of your 
e-mail software.

Summary of Contents for ApeosPort-V 6080










































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V 6080

JCM GEN5 Series Quick Reference Manual preview
GEN5 Series
Brand: JCM Pages: 22
Konica Minolta Bizhub 222 Instructions Manual preview
Bizhub 222
Brand: Konica Minolta Pages: 15
Xerox 3600DN - Phaser B/W Laser Printer Installation Instructions preview
3600DN - Phaser B/W Laser Printer
Brand: Xerox Pages: 2
Ricoh Lanier AP206 Setup Manual preview
Lanier AP206
Brand: Ricoh Pages: 406
Triumph Adler P-6038i Quick Manual preview
P-6038i
Brand: Triumph Adler Pages: 4
Riso RP3100AW User Manual preview
RP3100AW
Brand: Riso Pages: 208
Konica Minolta BIZHUB C450P User Manual preview
BIZHUB C450P
Brand: Konica Minolta Pages: 404
Kyocera ECOSYS FS-C2526MFP Quick Installation Manual preview
ECOSYS FS-C2526MFP
Brand: Kyocera Pages: 36
Riso comcolor gd series Safety Information Manual preview
comcolor gd series
Brand: Riso Pages: 34
Formulatrix ROCK IMAGER FRAP Benchtop User Manual preview
ROCK IMAGER FRAP Benchtop
Brand: Formulatrix Pages: 118
Oki CX2032 MFP (Portuguese) Guia Do Usuário preview
CX2032 MFP
Brand: Oki Pages: 247
Canon imagePress C710 Customer Expectation Document preview
imagePress C710
Brand: Canon Pages: 129
Canon imagePRESS C7000VP Series Service Manual preview
imagePRESS C7000VP Series
Brand: Canon Pages: 87
Canon imagePRESS C7000VP Series Trouble Shooting Information preview
imagePRESS C7000VP Series
Brand: Canon Pages: 137
Canon imageCLASS MP700 Quick Reference Manual preview
imageCLASS MP700
Brand: Canon Pages: 96
Canon imagePRESS C800 Series Technical & Service Manual preview
imagePRESS C800 Series
Brand: Canon Pages: 168
Canon imageFormula DR-6010C User Manual preview
imageFormula DR-6010C
Brand: Canon Pages: 142
Canon IMAGERUNNER 1670F Facsimile Manual preview
IMAGERUNNER 1670F
Brand: Canon Pages: 162

Brands by name

Popular brands

Load more brands