Fuji Xerox ApeosPort-V 6080 Administrator'S Manual Download

Page: 275 / 745

Accounting

275

To
ols

Select any item, and set it.

Select [Close].

User ID

Enter a user ID to use the machine. Up to 32 single-byte characters are allowed.

User Name

Set a user name. Up to 32 single-byte characters are allowed.

For information about how to enter characters, refer to "Entering Text" (P.38).

Passcode

Set a passcode. Setting a passcode is strongly recommended for security. Set a passcode
from 4 to 12 digits.

Note

•

When [Passcode Entry for Control Panel Login] is set to [On], a passcode entry is required upon user
authentication.

For information on how to change your passcode later, refer to "Changing Passcode" (P.408).

E-mail Address

Enter an e-mail address with up to 128 characters. The address set here will be set as [From]
under [E-mail].

For information about how to enter characters, refer to "Entering Text" (P.38).

Device Access

Set whether to allow the machine use.

Enabled

Allows the machine use. When the smart card reader is connected, you can select the
settings for each Login Type.

Disabled

Prohibits the machine use.

Service Access

You can place restrictions on the use and the maximum number of allowed pages for each
of the Copy, Fax, Scan, and Print services.

Select [Service Access].

Summary of Contents for ApeosPort-V 6080









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-V 6080

Reviews:

Related manuals for ApeosPort-V 6080

Brands by name

Popular brands

Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

Search results

Summary of Contents for ApeosPort-V 6080

Reviews:

Related manuals for ApeosPort-V 6080

Brands by name

Popular brands