manualshive.com logo in svg

Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

The Fuji Xerox ApeosPort-V 6080 is a high-performance multifunction printer designed for efficient document management. To maximize its potential, an Administrator's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and invaluable tips to enhance your experience with this exceptional product.

Share
Download
background image

13 Encryption and Digital Signature Settings

370

En
cr

yp
ti

o

n

 a

n

d

 D

ig

it

a

l 

S

ign
at

ur

e

 S

e

tt

in

gs

13

Configuration of HTTP Communications Encryption

This section describes the settings to encrypt HTTP communications.

The following shows the reference section for each procedure.

Installation Overview.................................................................................................................................................................. 370

Step1 Configuration on the Machine ..................................................................................................................................... 370

Step2 Configuration on the Computer................................................................................................................................... 371

Installation Overview

To encrypt HTTP communications, configure the machine and your computer as follows:

„

Configuration on the Machine

Configure a certificate on the machine. No certificate is registered on the machine by 
factory default. Configure certificates for an SSL server as needed. 

z

Configuring certificates by CentreWare Internet Services

The following two methods are available depending on types of certificates.

- Create a self-signed certificate on the machine, and then enable HTTPS.
- Enable HTTPS, and then import a certificate issued by another CA to the machine.

„

Configuration on the Computer

To encrypt communications between a web browser and the machine, enter an address 
beginning with "https" instead of "http" into the address box of the web browser.

Step1 Configuration on the Machine

Configure a certificate on the machine. No certificate is registered to the machine by factory 
default. Configure certificates for an SSL server as needed. 

The following describes the procedures to set up a certificate by CentreWare Internet 
Services.

Setting up a Certificate using CentreWare Internet Services

To set up a certificate using CentreWare Internet Services, you can have the machine create 
a self-signed certificate for SSL server or can import any registered certificate (issued by 
another CA) to the machine.

For information on how to import a registered certificate, click [Help] at the upper right corner of the CentreWare Internet 
Services screen to see help.

Important •

To display the online help for CentreWare Internet Services, users need to have the environment to 
connect to the Internet. The communication fee shall be borne by you.

•

When performing SSL communications using a self-signed certificate created on the machine, or a 
certificate with which the character code is encoded with UTF-8, you will not be able to connect with 
SSL if Internet Explorer is used with Mac OS X 10.2 or later. 
This is because the operating system cannot recognize the character code (UTF-8) of the certificate. 
Use Netscape 7 in the above-mentioned OS environments.

•

You cannot import a certificate that has been already registered in [Local Device] or [Others]. Delete 
the registered certificate before importing.

1

Start CentreWare Internet Services.

For more information on how to start CentreWare Internet Service, refer to "Starting CentreWare Internet Services" (P.300).

2

Create a certificate.

Summary of Contents for ApeosPort-V 6080










































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V 6080

Magtek ExpressCard 2000 Preventive Maintenance Procedure preview
ExpressCard 2000
Brand: Magtek Pages: 25
Panasonic WORKIO DP-C106 Operating Instructions Manual preview
WORKIO DP-C106
Brand: Panasonic Pages: 166
Oki OKIFAX 5050 Handbook preview
OKIFAX 5050
Brand: Oki Pages: 98
Xerox ApeosPort-III C7600 User Manual preview
ApeosPort-III C7600
Brand: Xerox Pages: 369
Tally XPRESS T9412i Network User'S Manual preview
XPRESS T9412i
Brand: Tally Pages: 76
Star mC-Print3 MCP31LB How To Connect preview
mC-Print3 MCP31LB
Brand: Star Pages: 12
Oki PRO511DW Setup Poster preview
PRO511DW
Brand: Oki Pages: 2
Xerox DocuPrint C3300 DX User Manual preview
DocuPrint C3300 DX
Brand: Xerox Pages: 200
Xante ScreenWriter Colour ScreenWriter User Manual preview
ScreenWriter Colour ScreenWriter
Brand: Xante Pages: 446
Fuji Xerox DocumentCentre C240 Series User Manual preview
DocumentCentre C240 Series
Brand: Fuji Xerox Pages: 275
Citizen Swift 120D User Manual preview
Swift 120D
Brand: Citizen Pages: 44
Oki C6050n Installation preview
C6050n
Brand: Oki Pages: 2
Xerox DocuColor 240 Settings Manual preview
DocuColor 240
Brand: Xerox Pages: 6
Brother DCP-2537DW Service Manual preview
DCP-2537DW
Brand: Brother Pages: 340
Brother 7000FC Inkjet Setup Manual preview
7000FC Inkjet
Brand: Brother Pages: 45
Brother DCP 110c - Color Flatbed Multi-Function Center (French) Manual De L'Utilisateur preview
DCP 110c - Color Flatbed Multi-Function Center
Brand: Brother Pages: 107
Brother DCP-340CW Service Manual preview
DCP-340CW
Brand: Brother Pages: 406
Brother 4750e - IntelliFAX B/W Laser Owner'S Manual preview
4750e - IntelliFAX B/W Laser
Brand: Brother Pages: 231

Brands by name

Popular brands

Load more brands