Fuji Xerox ApeosPort-V 6080 Administrator'S Manual Download

Page: 401 / 745

Configuration for Authentication

401

then

on a

nd
Ac
co

ing
F

res

Changing the Default Authorization Group Settings

Perform the following procedures to change the settings of the default authentication
group.

The settings changed here will be used as the default value of the authorization group for a
created user.

Press the <Log In/Out> button.

Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].

When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].

Note

•

The default user ID is "11111".

•

The default passcode is "x-admin".

Select [Tools] on the Services Home screen.

Select [Authentication/Security Settings].

Select [Authentication].

Select [Create Authorization Groups].

Select the group displayed as [DefaultGroup (Default)], and then select [Create/Delete].

Set each item.

For more information on the change of the authorization group, refer to "Create Authorization Groups" (P.287).

Select [Close] repeatedly until the [Tools] screen is displayed.

Select [Close].

Creating an Authorization Group

Perform the following procedures to add authorization groups, if necessary.

Press the <Log In/Out> button.

Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].

When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].

Note

•

The default user ID is "11111".

•

The default passcode is "x-admin".

Select [Tools] on the Services Home screen.

Select [Authentication/Security Settings].

Select [Authentication].

Select [Create Authorization Groups].

Select a group displayed as [(No Name)], and then select [Create/Delete].

Enter a group name into [Group Name].

Set the other items.

Summary of Contents for ApeosPort-V 6080









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-V 6080

Reviews:

Related manuals for ApeosPort-V 6080

Brands by name

Popular brands

Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

Search results

Summary of Contents for ApeosPort-V 6080

Reviews:

Related manuals for ApeosPort-V 6080

Brands by name

Popular brands