manualshive.com logo in svg

Fuji Xerox ApeosPort-VII C5588, Quick Reference

The Fuji Xerox ApeosPort-VII C5588 is a high-performance multifunction printer designed for efficient document management. With its advanced features and user-friendly interface, this machine ensures optimal productivity in any office environment. For a quick reference to its functions and operations, you can easily download the free user manual from our website, 88.208.23.73:8080.

Share
Download
background image

Image Quality Trouble

241

Is the paper tray inserted 
correctly?

Firmly push in the tray until it stops to insert it 
properly.

Part of the image 
is missing on the 
copy.

Is the paper damp?

If the paper is damp, the copy image may be 
partially missing or unclear. Replace the 
paper with a new one.

Is folded or wrinkled paper 
included in the tray?

Remove the unsuitable paper or replace all of 
the paper with a new one.

Is the document pasted or 
folded?

The pasted or folded section may not be 
laying flat on the document glass. Place a 
stack of white sheets on top of the document 
to flatten the document against the 
document glass.

The copy has a 
stripe pattern.

Is the enlargement ratio too 
large?

Vertical stripes may be printed on the copies 
depending on the ratio. Adjust the ratio to 
eliminate the stripes.

Color shift of 
color copies is 
poor, resulting in 
unsatisfactory 
image quality.

Is the color calibration 
incorrect?

Execute auto calibration.

Reference

z

Refer to "Executing Combined Calibration" (P.149) .

Is the device set where it is 
exposed to direct sunlight?

If the document glass is exposed to strong 
light when you turn the device on or cancel 
the Power Saver mode, color shift may occur. 
Close the document cover and turn the device 
on, and when the device becomes ready to 
copy or print, turn the device off and then on 
one more time.

Printing is faint.
(smudged, 
unclear)

The paper is damp.

Replace the paper with new one.

The drum cartridge has 
deteriorated or is damaged.

Replace the drum cartridge with a new one.

There is no toner left in the 
toner cartridge.

Replace the toner cartridge with a new one.

Reference

z

Refer to "Replacing Toner Cartridge" (P.122).

Symptom

Cause

Remedy

Summary of Contents for ApeosPort-VII C5588
























































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-VII C5588

LabelTac 4 Quick Start Manual preview
4
Brand: LabelTac Pages: 2
TE Connectivity T3212 Quick Start Manual preview
T3212
Brand: TE Connectivity Pages: 2
TE Connectivity T3200 Replacement Instructions preview
T3200
Brand: TE Connectivity Pages: 2
UBI EasyCoder 501 SA Service Manual preview
EasyCoder 501 SA
Brand: UBI Pages: 214
UBI EasyCoder 401 Technical Manual preview
EasyCoder 401
Brand: UBI Pages: 64
Xerox DocuPrint C525 A Quick Reference Manual preview
DocuPrint C525 A
Brand: Xerox Pages: 49
Xerox DocuPrint C2100 Quick Reference Manual preview
DocuPrint C2100
Brand: Xerox Pages: 206
Xerox DocuPrint 96 Installation Planning Manual preview
DocuPrint 96
Brand: Xerox Pages: 116
Xerox DocuPrint 96 Message Manual preview
DocuPrint 96
Brand: Xerox Pages: 358
Xerox DocuPrint 4635 Operator'S Manual preview
DocuPrint 4635
Brand: Xerox Pages: 344
Xerox DocuPrint 205 Operation Manual preview
DocuPrint 205
Brand: Xerox Pages: 59
Xerox DocuPrint 900 Product Safety Data Sheet preview
DocuPrint 900
Brand: Xerox Pages: 2
Xerox C230 Quick Reference Manual preview
C230
Brand: Xerox Pages: 10
Xerox DocuPrint 180 Maintenance Manual preview
DocuPrint 180
Brand: Xerox Pages: 51
Xerox DocuPrint 180 Solution Manual preview
DocuPrint 180
Brand: Xerox Pages: 110
Xerox 7300DX - Phaser Color Laser Printer Overview preview
7300DX - Phaser Color Laser Printer
Brand: Xerox Pages: 8
Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual preview
8400B - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 203
Xerox 3150 - Phaser B/W Laser Printer Product Data Sheet preview
3150 - Phaser B/W Laser Printer
Brand: Xerox Pages: 2

Brands by name

Popular brands

Load more brands