Fuji Xerox DocuCentre-IV 2060 User Manual Download

Page: 134 / 399

3 Copy

132

Co
py

Select any option.

Note

•

Select [ ] to return to the previous screen or [ ] to move to the next screen.

Off

Build Job is not applied.

Build Job is applied. The feature buttons appear. Specify any option if necessary.

Important •

The features selected here cannot be canceled or changed while the machine executes a
copy job.

For information on features available in Build Job, refer to "Features that can be set in Build Job"
(P.132).

Features that can be set in Build Job

Copy Output

For more information, refer to "Copy Output (Specifying Finishing Options)" (P.125).

Booklet Creation

For more information, refer to "Booklet Creation (Creating a Booklet)" (P.105).

Covers

Important •

The machine does not copy on a cover when using the Build Job feature.

For more information, refer to "Covers (Attaching Covers to Copies)" (P.108).

Annotations

For more information, refer to "Annotations (Adding a Comment/a Date/Page Numbers to Copies)"
(P.113).

Segment Separators

For more information, refer to "[Segment Separators] Screen" (P.134).

Watermark

For more information, refer to "Watermark (Printing Control Numbers on the Background of Copies)"
(P.119).

[Copy] Screen When Build Job is in Progress

The following describes the screen that appears while the Build Job is being executed.

Chapter Start

Displays the [Build Job - Chapter Start] screen.

For more information, refer to "[Build Job - Chapter Start] Screen" (P.134).

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands