Fuji Xerox DocuCentre-IV 2060 User Manual Download

Page: 141 / 399

Job Assembly

139

Co
py

Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected
Area)

This feature allows you specify the areas to be deleted from a document image. Up to

three areas can be specified.

Select [Delete Outside/Delete Inside].

Select any option.

Off

No area is deleted.

Delete Outside

Deletes the outside of the selected area.

Delete Inside

Deletes the inside of the selected area.

Area Settings

Displays the [Delete Outside/Delete Inside - Area 1 (Area 2 or Area 3)] screen. You can

specify up to three areas.

For more information, refer to "[Delete Outside/Delete Inside - Area 1 (Area 2 or Area 3)] Screen"
(P.140).

Originals

When the original document is a 2-sided document, specify from which side the

specified area is to be deleted.

Both Sides
Applies the settings to both sides of the document.

Side 1 Only
Applies the settings to Side 1 of the document.

Side 2 Only
Applies the settings to Side 2 of the document.

Original Orientation

Allows you to specify the orientation of the document so that the machine can identify

the top of the document.

Note

•

If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands