Fuji Xerox DocuCentre-IV 2060 User Manual Download

Page: 210 / 399

Fa
x

4 Fax

208

More Options

This section describes the features you can select on the [More Options] screen. The

following shows the reference section for each feature.

Remote Polling (Retrieving Files from Remote Machines)......................................................208
Store for Polling (Storing Files on the Machine that a Remote Machine can Retrieve)...........210
On-hook (Confirming Remote Machine Response Prior to Transmission)..............................212

Select [Fax/Internet Fax] on the [Services
Home] screen.

Select a feature on the [More Options]
screen.

Remote Polling (Retrieving Files from Remote Machines)

Remote Polling is a feature that allows your machine to retrieve a file stored in a remote

machine. You are charged for the transmission fee.
This feature is used for Facsimile Information Services.

For information on Facsimile Information Services, refer to "Receiving Faxes" (P.221).

Note

•

The Remote Polling feature may be not available depending on the remote machine.

•

This feature is not available for the Server Fax service.

•

When you specify polling in combination with [Delay Start] on the [Fax/Internet Fax Options]
screen, you can retrieve a file at a specified time.

Remote Polling

You can retrieve a file stored on a remote machine by sending a polling request from

your machine. You can also retrieve files from multiple machines. This is called Multi-

Polling.

Secure Polling (DTMF Method)

You can retrieve a file from a folder on a remote machine by sending a request from

your machine. A folder must be created on the remote machine. If the folder is

passcode-protected, you can retrieve a file confidentially.

Important •

You cannot use polling to retrieve files from multiple remote folders simultaneously.

Note

•

DTMF method is not available in the IP Fax (SIP).

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands