Fuji Xerox DocuCentre-IV 2060 User Manual Download

Page: 264 / 399

5 Scan

262

Scan

Select [Add to Address Book].

Select [Save].

Address

To change the address number, select [Edit] and then the desired number.

Name

To change the recipient name, enter a new name with the keyboard displayed by

selecting [Name].

Note

•

The recipient name may not be displayed depending on the settings.

Specifying a Destination (Specifying a Destination PC Using the Screen
Keyboard)

Enter information in the fields provided for the selected protocol, to specify a forwarding

destination.

Select the item to be set.

Note

•

You can also select [Address Book] to
enter information.

•

Fields displayed on the screen vary
depending on the selected protocol.

Enter information using the keyboard
displayed on the screen.

For information on how to enter characters, refer to
"Entering Text" (P.63).

Note

•

To delete characters, select [Backspace].

Server

This option is displayed when you select

[FTP] or [SMB] in [Transfer Protocol]. Enter a server name or IP address. When the

save location is in the DFS namespace on Windows, enter a domain name or server

name. Up to 64 characters are allowed.
The following are examples:

For [FTP]:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100

For [SMB]:
Server name: myhost
IP address: 192.168.1.100

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands